TRG10R120-36E03-Level-VI Cincon

V21 TRG10R SERIES 10W SWITCHING ADAPTER Features * Universal Input: 90~264Vac * Continuous Short Circuit Protection * Interchangeable AC Plugs * EMI Meets EN55032 Class B and CISPR/FCC Class B * Over Voltage Protection * No Load Power Consumption<75mW * Approved IEC/EN/UL62368-1 * Meet CoC V5 Tier 2 & DoE Level VI (Output cable length 1800mm) Ordering information TRG10RXXX - XX E XX Model No. DC Plug Type With OVP DC Cable Length and Type 01: 720mm 02: 1220mm 03: 1800mm 11: 720mm with Ferrite Core 12: 1220mm with Ferrite Core 13: 1800mm with Ferrite Core * 18AWG / UL1185 for Vo: 5V, 5.9V, 6V, 7.5V, 9V * 20AWG / UL1185 for Vo: 12V, 13.6V * 22AWG / UL1185 for Vo: 15V, 18V * 24AWG / UL1185 for Vo: 24V VOLTAGE LINE LOAD OUTPUT OUTPUT RIPPLE & NOISE AVG. MODEL ACCURACY REGULATION REGULATION VOLTAGE CURRENT NOTE 1 EFF. NOTE 2 NOTE 3 NOTE 4 TRG10R050 5V 1600mA 50mV 2% 1% 4% 77.37% TRG10R059 5.9V 1500mA 1% 2% 1% 3% 78.12% TRG10R060 6.0V 1500mA 1% 2% 1% 3% 81.57% TRG10R075 7.5V 1200mA 1% 2% 1% 3% 81.57% TRG10R090 9V 1100mA 1% 2% 1% 2% 82.14% TRG10R120 12V 850mA 1% 2% 1% 2% 82.32% TRG10R136 13.6V 750mA 1% 2% 1% 2% 82.32% TRG10R150 15V 700mA 1% 2% 1% 2% 82.49% TRG10R180 18V 550mA 1% 2% 1% 2% 82.14% TRG10R240 24V 400mA 1% 2% 1% 2% 81.96% Specifications are subject to change without notice. 1 V21 Specifications TRG10R Series Derating Curve INPUT SPECIFICATIONS: 100% Voltage ....................................................... 90~264Vac 75% 120~370Vdc Frequency ...... 47 to 63Hz 20LFM(Natural Convection) 50% Input Current ...................................... 0.4A max. Inrush Current .................... 40A max. 240Vac 25% Conducted EMI . CISPR/FCC Class B Leakage Current . 0.25mA max. 0% -20 -10 0 10 20 30 40 50 60 OUTPUT SPECIFICATIONS: o Ambient Temperature( C) Holdup Time 10mS typ. 115Vac Short Circuit Protection . Continuous(Auto Recovery) Over Voltage Protection ................. TVS Component to Clamp NOTE: Temperature Coefficient .............................. 0.05%/ 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple&noise measuring 20MHz BW. GENERAL SPECIFICATIONS: Isolation Input to output = 4,242VDC 2. Voltage setpoint at 60% full load. 3. Line regulation is measured from 100Vac to 240Vac with full load. Operating Temperature ............................. -20 ~ 60 (see Derating Curve) 4. Load regulation is measured from 60% to full load and from 60% to Storage Temperature .................. -20~85 Humidity .............. 93% RH max. Non condensing 20% load (60% +/- 40% load). Cooling .. Natural Convection Switching Frequency .. 67KHz typ. MTBF . MIL-HDBK-217F, GB, 25 /115VAC . 200K hrs min. Altitude 2000m Dimensions .... 2.858x1.823x1.402lnches (72.6x46.3x35.6mm) Weight 130g(0.29 Pounds) SAFETY AND EMC: Emission and lmmunity . EN55032 Class B, FCC Part 15 Class B EN61000-6-3, EN61000-3-2, EN61000-3-3 EN55024, EN61204-3, EN61000-6-1 Safety . Class II, IEC/EN/UL62368-1/609501-1 Mechanical Specification All Dimensions are in inches(mm) Tolerance:Inches:X.XXX0.02 Millimeters:X.XX0.5 UNIT: inches(mm) 2.858 72.60 70.866 1800.00 1.969 50.00 1.402 35.60 DC Plug type: V+ ) V- DC Plug:Right Angle(5.5/2.1)L12mm 18AWG / 1800mm 0.492 12.50 0.002 0.05 0.720 18.30 0.002 0.05 1.494 37.95 0.874 22.20 0.005 0.13 0.157 4.00 0.248 6.30 Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 1.535 39.00 1.823 46.30 0.689 17.50 0.019 0.50 0.630 16.00 0.685 17.40 0.027 0.70 1.102 28.00 Rated Load(%) 0.748 19.00 0.019 0.50 0.988 25.10 0.669 16.99 0.012 0.30 0.342 8.70 0.019 0.50 1.240 31.48 1.139 28.93