V15 TRG45 SERIES 45W SWITCHING ADAPTER Features * Universal Input Range 90~264VAC * Meets EN55022 Class B and CISPR/FCC Class B * Continuous Short Circuit Protection * Over Voltage Protection * Meet CEC & ErP Level V (Output Cable Length 1800mm) (TRG45A120 Output Cable Length720mm 16AWG) Ordering information TRG45AXXX- XX X XX Model No. DC Plug Type OVP DC Cable Length and Type E: With OVP 01: 720mm 02: 1220mm 03: 1800mm 11: 720mm with Ferrite Core 12:1220mm with Ferrite Core 13:1800mm with Ferrite Core *18AWG/UL1185 RIPPLE & VOLTAGE LINE LOAD % EFF. OUTPUT OUTPUT (Typ.) MODEL NOISE ACCURACY REGULATION REGULATION VOLTAGE CURRENT NOTE 5 NOTE 2 NOTE 1 NOTE 3 NOTE 4 TRG45A120 12V 3.75A 120mVp-p 2% 1% 3% 85% TRG45A150 15V 3.00A 150mVp-p 2% 1% 3% 86% TRG45A180 18V 2.50A 180mVp-p 2% 1% 2% 86% TRG45A190 19V 2.37A 190mVp-p 2% 1% 2% 86% TRG45A240 24V 1.88A 240mVp-p 2% 1% 2% 88% TRG45A480 48V 1.00A 480mVp-p 2% 1% 2% 88% Specifications are subject to change without notice. 1 V15 Specifications TRG45 Series Derating Curve INPUT SPECIFICATIONS: 100% Voltage .......................................................... 90~264Vac 80% Frequency ...... 47 to 63Hz 60% Inrush Current .. Cold Start 25 70A max. 240Vac 20LFM(Natural Convection) Conducted EMI .. CISPR/FCC Class B 40% Leakage Current ... 3.5mA max. 20% OUTPUT SPECIFICATIONS: 0% Holdup Time 8ms typ. 115Vac 0 10 20 30 40 50 60 Short Circuit Protection . Continuous o Ambient Temperature( C) Over Voltage Protection Yes Temperature Coefficient ............................ 0.05%/ GENERAL SPECIFICATIONS: NOTE: Isolation Input to output = 4,242VDC 1.Voltage accuracy at 60% full load. 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Operating Temperature .............................. 0 ~ 60 (see derating curve) Storage Temperature .................. -20 ~ 85 Ripple & Noise measurement 20MHz BW. Humidity .................. 93% RH max. Non condensing 3. Line regulation measured from 100Vac to 240Vac, full load. Cooling . Natural Convection 4. Load regulation measured from 60% to 100% full load and from Switching Frequency 100KHz Typical 60% to 20% full load (60% +/- 40% full load). 5. Typical efficiency at 230VAC and full load at 25. MTBF MIL-HDBK-217F, GB, at 25/115VAC . 200K hrs min. Altitude 2000m 6. Various TR Series adapters are PSE certified. PSE certification Dimensions ... 4.724x2.047x1.220 inches (120.00x52.00x31.00mm) alone is not sufficient for importation into Japan. A valid PSE mark Weight 280g (0.62 Pounds) must contain the name of the importer as shown in the example below. AC Inlet .. IEC320/C14 If PSE mark is required, the name of the registered importer must be supplied to Cincon on order placement. Product labels will not contain SAFETY AND EMC: Emission and lmmunity EN55022 Class B, FCC Part 15 Class B PSE mark if importer name is not supplied. Consult factory or local EN61000-6-3, EN61000-3-2, EN61000-3-3 represen tative for details. EN55024, EN61204-3, EN61000-6-1 Safety IEC60950-1, EN60950-1, UL60950-1 Mechanical Specification All Dimensions are in inches(mm) Tolerance:Inches:X.XXX0.02 Millimeters:X.XX0.5 DC Plug type: V+ ) V- DC Plug :Right Angle(5.52.1) L12mm 18AWG1800mm Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 Rated Load(%)