Tom Cribb Road, Thamesmead, London SE28 0BH Tel: +44 (0)20 8316 4477 or (0)20 8317 1717 Fax: +44 (0)20 8317 2400 Xenon Strobe - Visual Alarm Email: cliffordandsnell aol.com Web Site: www.cliffordandsnell.com C l i f f o r d & S n e l l ~ Yodac ~ MAIN FEATURES Continuously rated Strobe 2.5 and 5 joule High flash intensity 360 degree visibility Reliable and simple to install Complements audible alarm system Flush mounting base available Red / White flame retardant ABS plastic enclosure Lens colours: Amber (A), Red (R), Green (G), Opal (O), Blue (B) and Clear (C) made from flame retardant polycarbonate plastic. DIMENSIONS (mm) Steady lamp version available upon request TECHNICAL SPECIFICATION 90 (3.5) Operating temperature range 25 to +40 deg C Storage temperature range 40 to +70 deg C Relative humidity 90% 40 deg C IP65 Rated Weight: DC types 0.24Kg AC types 0.22Kg 90 (3.5) Operating voltage 12Vdc or 24Vdc or 48Vdc 115Vac or 230Vac Current consumption (Flash Energy). See design data below. Flash rate 1 per second 49 (1.9) 81 (3.2) MOUNTING All units are supplied separate from the back box for ease of installation. The back box must be mounted with the two cable entries at the top or bottom. The back box should be mounted to a reasonably flat surface or to a standard wiring box, using any All dimensions quoted are approximate only and subject to change without notice as are of the internal mounting holes. A gasket is supplied, should the technical features resulting from continual development and improvement. surface be uneven, or if the unit is to be used in wet conditions. To maintain the integrity of the weather seal, the cable must be CONFIGURATOR fitted using a suitable sealed gland. The installation is completed by fitting the beacon onto the back box by means of the supplied Unit Type Strobe screws. Strobe 12Vdc 2.5joules supply DESIGN DATA 24Vdc 2.5 joules Voltage and Operating Voltage 12Vdc 24Vdc 48Vdc 115Vac 230Vac 24Vdc 5.0 joules Flash Flash Energy (Joules) 2.5 2.5 - 5 5 5 5 Energy 48Vdc 5.0 joules Light output, opal lens 115Vac 5.0 joules Candela sec 4.5 4.5 - 14 14 14 14 Current consumption 230Vac 5.0 joules (mA) 300 150 - 250 135 130 70 Lens Colours CAUTION: High voltages are present within the beacon when operational. LINE MONITORING Base Colours Red Flame Monitoring via reverse polarity End of line resistance. Minimum 3K3 ohms 0.5 watts wire-wound Red Normal or metal film type White APPROVAL SPECIFICATION Certification USA/Canada UL 1638 CAN/ULC-S526-M87 DC Type AC Type Controlled document No. D7410-01-02 BGRICE 3 Issued Data Sheets V4 Clifford & Snell a division of Signature Industries part of the Digital Angel Corporation X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Clifford And Snell manufacturer: Other Similar products are found below : YL50/L50/A/RF/WR YA80/D/RF/SU/WR YA40/D/RN/WR YA50/L/RF/WR YL40/N50/A/RN/WR YL40/D50/A/RN/WR FD40/D00/A/RN/8 FL40/N50/R/RN YL50/N50/R/RF/WR YA50/N/RF/WR YA50/D/RF/WR YL50/D50/R/RF/WR YA30/D/RF/WR