Tom Cribb Road, Thamesmead, London SE28 0BH Tel: +44 (0)20 8316 4477 or (0)20 8317 1717 Fax: +44 (0)20 8317 2400 Industrial Audible and Visual Alarm Email: cliffordandsnell aol.com Web Site: www.cliffordandsnell.com C l i f f o r d & S n e l l ~ Yodac ~ MAIN FEATURES 2 Stage alarm High sound output 3 wire polarised DC (Not additional voltage option) & AC, or KM91259 2 wire bi-polar for DC only. 3 wire AC second stage control Complies with BS 5839 Strobe 2.5 and 5 joule. Choice of 6 lens colours: Amber (A), Red (R), Green (G), Opal (O), Blue (B) and Clear (C) made from flame retardant polycarbonate plastic Red / white flame retardant ABS plastic enclosure. YO4 YL4 Continuously rated Flush mounting base available DIMENSIONS (mm) 32 selectable tones meeting international regulations 90 (3.5) Sound selection via 5 way DIL switch 81 (3.2) TECHNICAL SPECIFICATION 183 (7.2) Operating temperature 25 to +55 deg C Storage temperature 40 to +70 deg C Operating voltage 24Vdc, 48Vdc 115Vac, 230Vac +/- 10% Additional voltage options (Sounders only) All dimensions quoted are approximate only and subject to change without notice 24Vdc and 48Vdc (BT) as are technical features resulting from continual development and improvement. 110Vdc CONFIGURATOR (12Vdc versions will produce approx. 6dB less output) Unit type YO4 Relative humidity 95% 40 deg C Supply 24Vdc Sound output 106dB(A) at 1 mtr Voltage 48Vdc IP54 rated std, IP65 (WR) to order 115Vac Weight: YO4 0.22Kg (DC), 0.32Kg (AC) YL4 0.47Kg (DC), 0.57Kg (AC) 230Vac Volume control allowing 18dB(A) adjustment 24Vdc and 48Vdc Minimum current consumption 20mA 110Vdc Optional independent 2nd stage via second DIL switch (DC only) Material Red Flame Red Normal MOUNTING White The YO4/YL4 series alarm should be mounted to a reasonably flat wall or bulkhead of suitable material using the internal fixing holes. IP65 The recommended fixing screws are dia 4.5 mm max x 20 mm long. To maintain the integrity of the weather seal, the cable must be fitted Optional Independent 2nd Stage using a suitable sealed gland. Certification USA/Canada LINE MONITORING (DC Only) excludes additional Unit type YL4 voltage options Strobe 12Vdc 2.5 joules - 3 Wire 2 stage or 2 wire single stage, monitor via reverse polarity Supply 24Vdc 2.5 joules - 2 Wire 2 stage i.e. bi-polar inputs, monitor via threshold (applied Voltage voltage <1V) 24Vdc 5.0 joules and End of line resistor. Minimum 3K3 ohm 0.5 watts, wire-wound or Flash 48Vdc 5.0 joules metal film type. Energy 115Vac 5.0 joules APPROVAL SPECIFICATION 230Vac 5.0 joules Lens Colour UL 1638, UL 464 C22.2 No. 205-M1983, CAN/ULC-5526-M87 BS EN 54-3 : 2001 incorporates amendment A1 : 2002 Material Red Flame Red Normal White YO4 Vdc YO4 Vac YL4 Vdc IP65 Optional Independent 2nd Stage Certification USA/Canada YL4 Vac Controlled document No. D7406-01-02 BGRICE 3 Issued Data Sheets Y04-YL4 Clifford & Snell a division of Signature Industries Ltd part of the Digital Angel Corporation X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for clifford and snell manufacturer: Other Similar products are found below : YA50/L/RF/WR YL50/L50/A/RF/WR YA80/D/RF/SU/WR FL40/N50/R/RN YL40/D50/R/RN/WR YL40/D50/A/RN/WR YL50/N50/R/RF/WR YA50/N/RF/WR YA30/D/RF/WR YL50/D50/A/RF/WR YA50/D/RF/WR YL50/L50/R/RF/WR YL50/D50/R/RF/WR