U CMPCMP C A B L E G L A N D A N D C A B L E C O N N E C T I O N S P E C I A L I S T S A2 CABLE GLAND A2 Industrial Cable Gland CMP A2 type brass indoor and outdoor cable gland for use with all types of Unarmoured cable, providing mechanical cable retention and an environmental seal on the cable outer sheath. The CMP A2 range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design. TECHNICAL DATA CC AA Type A2 Design Specification BS 6121:Part 1:1989, EN 50262:1999 EN 50262 Mechanical Classifications Retention = Class B, Impact = Level 8, LL GOST R Certificate Number POCC GB. 05.H00110 GOST K Certificate Number KZ7500052.05.01.00063 EE RoK Permit for Use Number 08-067693 Lloyds Approval Number 01/00171 ABS Approval Number 01-LD 234401-PDA Continuous Operating Temperature -60C to +150C FF Ingress Protection Rating IP66, IP67, IP68 Ingress Protection Document 5046 C549D Deluge Protection Compliance DTS01 : 91 Deluge Protection Document 5046 C549-D Standard Gland Material Brass Alternative Gland Material Electroless Nickel Plated Brass, Stainless Steel, Aluminium Seal Material CMP Formulated Thermoplastic Elastomer DD Cable Type Unarmoured Sealing Technique CMP Displacement Seal Sealing Area(s) Cable Outer Sheath Adaptor/Reducer, Earth Tag, Entry Thread Seal, Locknut, Serrated Washer, Optional Accessories Shroud Cable Gland Selection Table Across Across Available Entry Threads C Cable Minimum Nominal Ordering Cable Cable PVC Bedding Flats Corners Thread Protrusion Reference Gland Gland Shroud Diameter A D D Length Length (Brass Metric) Weight Standard Option Reference* Size E F (Kgs) Metric NPT NPT Min Min Max Max 20S/16 M20 1/2 3/4 10.0 3.1 8.7 24.0 26.6 21.0 20S16A21RA PVC04 0.054 20S M20 1/2 3/4 10.0 6.1 11.7 24.0 26.6 21.0 20SA21RA PVC04 0.054 20 M20 1/2 3/4 10.0 6.5 14.0 27.0 30.0 24.0 20A21RA PVC05 0.059 25 M25 3/4 1 10.0 11.1 20.0 36.0 39.9 26.0 25A21RA PVC09 0.112 32 M32 1 1 1/4 10.0 17.0 26.3 41.0 45.5 27.0 32A21RA PVC10 0.128 40 M40 1 1/4 1 1/2 15.0 23.5 32.2 50.0 55.4 28.0 40A21RA PVC13 0.168 50S M50 1 1/2 2 15.0 31.0 38.2 55.0 61.0 29.0 50SA21RA PVC14 0.224 50 M50 2 2 1/2 15.0 35.6 44.1 60.0 66.5 30.0 50A21RA PVC17 0.231 63S M63 2 2 1/2 15.0 41.5 50.0 70.0 77.6 30.0 63SA21RA PVC20 0.360 63 M63 2 1/2 3 15.0 47.2 56.0 75.0 83.2 30.0 63A21RA PVC22 0.344 75S M75 2 1/2 3 15.0 54.0 62.0 80.0 88.7 32.0 75SA21RA PVC24 0.466 75 M75 3 3 1/2 15.0 61.1 68.0 85.0 94.2 32.0 75A21RA PVC26 0.395 90 M90 3 3 1/2 15.0 66.6 79.4 108.0 120.7 44.0 90A21RA PVC31 1.346 100 M100 4 - 15.0 76.0 91.0 123.0 137.8 48.0 100A21RA 150/50HST 1.575 115 M115 - - 15.0 86.0 98.0 133.4 147.6 55.0 115A21RA 180/60HST 2.322 130 M130 - - 15.0 97.0 115.0 152.4 164.9 62.0 130A21RA 180/60HST 3.400 All dimensions in millimetres Note: *LSF Shrouds also available on request. Marine approvals including Lloyds, DNV & ABS are also available from CMP Products. Other thread forms are available. 82 www.cmp-products.com INDUSTRIAL CABLE GLANDSX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Wire Identification category: Click to view products by CMP manufacturer: Other Similar products are found below : CU6337-000 CU6342-000 FCA-410-12 11631010 1-1768037-1 1-1768037-2 1-1768050-0 PXLK-VI Q62184-1 A64304-000 QMT221 HK032WE1NF038B 1330-0519-10 1395199-1 1395200-1 1395202-1 DMVF050WE-300S6 D-SCE-1K-2.4-50-4-CS7834 1538738-1 E90935-000 EC1238-000 EC1465-000 EC1855-000 EC1859-000 EC1863-000 EC5415-000 EC7277-000 EC7352-000 EC7603-000 EC7707-000 EC7735-000 EC7768-000 EC7828-000 EC7854-000 EC7952-000 EC8128-000 1768037-8 1768041-7 NC-127191-10-9 HS048WE2NF038B C03232-000 HTCM-SCE-14-4H-9 HTMS-3/16-9 HT-SCE-1/4-2.0-4 HT-SCE-3/16-2.0-4 HTTMS-1/2-1.50-9 HTTMS- CM-1/2-4H-9 HX-SCE-19.0-50-9 HX-SCE-6.4-50-4 C25254-000