0402HL-331XJRU Coilcraft

Web Sample Tools & Support Document 913-1 page & buy software & FAQ Chip Inductors 0402HL (1005) Halogen Higher inductance values than other 0402 ceramic chip 12 inductance values from 270 nH to 820 nH Free inductors 2 4 5 6 Inductance SRF typ DCR max Irms 1 3 Part number 5% (nH) Q typ (MHz) (Ohms) (mA) AEC 0402HL-271XJR 270 11 25 MHz 590 1.95 190 + Q200 85C 0402HL-301XJR 300 11 25 MHz 600 2.15 190 0402HL-331XJR 330 11 25 MHz 513 2.23 170 0402HL-361XJR 360 11 25 MHz 485 2.36 170 0402HL-391XJR 390 11 25 MHz 260 2.35 170 0402HL-471XJR 470 11 25 MHz 220 2.67 160 0402HL-511XJR 510 12 25 MHz 450 3.50 150 0402HL-561XJR 560 12 25 MHz 420 3.70 140 0402HL-601XJR 600 12 25 MHz 440 3.78 130 0402HL-681XJR 680 13 25 MHz 380 5.15 120 0402HL-741XJR 740 12 25 MHz 165 5.45 110 0402HL-821XJR 820 13 25 MHz 385 5.85 90 1. When ordering, please specify termination and packaging codes: 5. DCR measured on Cambridge Technology micro-ohmmeter and a Coilcraft CCF1010 test fixture. 0402HL-821XJRW 6. Current that causes a 15C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maxi- Termination: R = RoHS compliant matte tin over nickel over silver- mum ratings. platinum-glass frit. Special order: Q = RoHS tin-silver-copper (95.5/4/0.5) 7. Electrical specifications at 25C. or P = non-RoHS tin-lead (63/37). Refer to Doc 362 Soldering Surface Mount Components before soldering. Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than Designers Kit C453 contains 20 of each value full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). Core material Ceramic U = Less than full reel. In an effort to simplify our part Environmental RoHS compliant without exemption, halogen free numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, sim- Terminations RoHS compliant matte tin over nickel over silver- ply change the last letter of your part number from platinum-glass frit. Other terminations available at additional cost. U to W. Weight 0.7 1.3 mg 2. Inductance measured at 25 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 Ambient temperature 40C to +125C with Irms current, impedance analyzer. Storage temperature Component: 40C to +140C. 3. Q measured using a Coilcraft SMD-F fixture in Agilent/HP 4287A Tape and reel packaging: 40C to +80C impedance analyzer or equivalent. 4. SRF measured using Agilent/HP 8753D network analyzer and Coil- Maximum part temperature +140C (ambient + temp rise). craft SMD- D test fixture. Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 2000 per 7 reel. Paper tape: 8 mm wide, 0.66 mm thick, 2 mm pocket spacing PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. A max B max C max D E F G H I 0.048 0.031 0.022 0.010 0.018 0.008 0.026 0.014 0.025 inches 1,22 0,79 0,56 0,25 0,46 0,20 0,66 0,36 0,64 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Document 913-1 Revised 06/11/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 913-2 Chip Inductors 0402HL Series Typical Q vs Frequency L vs Frequency Halogen Free AEC + Q200 85C Typical Impedance vs Frequency Document 913-2 Revised 06/11/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.