Web Sample Tools & Support
Document 894-1
page & buy software & FAQ
Chip Inductors 0603HL Series (1608)
Higher inductance values than other 0603 inductors
Inductance range: 330 nH 3.3 H
2 4 5 6
Inductance SRF typ DCR max Irms Color
1 3 7
Part number 5% (nH) Q typ (MHz) (Ohms) (mA) code
0603HL-331XJR_ 330 @ 25 MHz 13 @ 25 MHz 420 0.970 330 Violet
0603HL-391XJR_ 390 @ 25 MHz 13 @ 25 MHz 400 1.05 330 Gray
0603HL-471XJR_ 470 @ 25 MHz 12 @ 25 MHz 200 1.15 300 White
0603HL-511XJR_ 510 @ 25 MHz 12 @ 25 MHz 340 1.20 300 Black
0603HL-561XJR_ 560 @ 25 MHz 12 @ 25 MHz 330 1.35 300 Brown
0603HL-681XJR_ 680 @ 25 MHz 12 @ 25 MHz 310 1.80 260 Red
0603HL-821XJR_ 820 @ 25 MHz 14 @ 25 MHz 290 2.45 190 Orange
0603HL-102XJR_ 1000 @ 25 MHz 14 @ 25 MHz 250 2.80 190 Yellow
0603HL-122XJR_ 1200 @ 25 MHz 14 @ 25 MHz 230 3.20 180 Green
0603HL-152XJR_ 1500 @ 25 MHz 15 @ 25 MHz 190 4.10 150 Blue
0603HL-182XJR_ 1800 @ 25 MHz 16 @ 25 MHz 180 5.30 140 Violet
0603HL-222XJR_ 2200 @ 25 MHz 16 @ 25 MHz 165 5.90 130 Gray
0603HL-272XJR_ 2700 @ 25 MHz 16 @ 25 MHz 150 7.00 120 White
0603HL-332XJR_ 3300 @ 25 MHz 18 @ 25 MHz 135 9.10 110 Black
1. When ordering, please specify termination and packaging code:
Designers Kit C449 contains 10 of each value
Core material Ceramic
0603HL-332XJRC
Environmental RoHS compliant without exemption, halogen free
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit
Terminations RoHS compliant matte tin over nickel over silver-plati-
Special order: Q = RoHS tin-silver-copper (95.5/4/0.5)
num-glass frit. Other terminations available at additional cost.
or P = non-RoHS tin-lead (63/37).
Weight 3.2 4.4 mg
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
Ambient temperature 40C to +125C with Irms current
B = Less than full reel. In tape, but not machine ready.
Maximum part temperature +140C (ambient + temp rise).
To have a leader and trailer added ($25 charge),
use code letter C instead.
Storage temperature Component: 40C to +140C.
2. Inductance measured at 0.1 Vrms, using a Coilcraft SMD-A fixture in
Tape & reel packaging: 40C to +80C
Agilent/HP 4287A impedance analyzer or equivalent with Coilcraft-
Resistance to soldering heat Max three 40 second reflows at
provided correlation pieces.
+260C, parts cooled to room temperature between cycles
3. Q measured using a Coilcraft SMD-A fixture in Agilent/HP 4287A
impedance analyzer or equivalent.
Temperature Coefficient of Inductance (TCL) +50 to +150 ppm/C
4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
SMD-D test fixture.
85% relative humidity)
5. DCR measured on Cambridge Technology Micro-ohmmeter or
equivalent. Failures in Time (FIT) / Mean Time Between Failures (MTBF)
6. Current that causes a 15C temperature rise from 25C ambient. This One per billion hours / one billion hours, calculated per Telcordia SR-332
information is for reference only and does not represent absolute
Packaging 2000 per 7 reel. Plastic tape: 8 mm wide,
maximum ratings.
0.23 mm thick, 4 mm pocket spacing, 1.0 mm pocket depth
7. Each part is marked with a single dot. The color dots are not unique
identifiers and correspond to multiple inductance values. PCB washing Tested to MIL-STD-202 Method 215 plus an additional
8. Electrical specifications at 25C. aqueous wash. See Doc787_PCB_Washing.pdf.
Refer to Doc 362 Soldering Surface Mount Components before soldering.
Document 894-1 Revised 10/12/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.Document 894-2
Chip Inductors 0603HL Series
Typical L vs Frequency Typical Q vs Frequency
10,000 25
20
3300 nH
1800 nH
15
1000 nH
1000
560 nH
560 nH
10
390 nH
390 nH
1000 nH
5
1800 nH
3300 nH
100 0
110 100 1000 110 100 1000
Frequency (MHz) Frequency (MHz)
B
C
Typical Impedance vs Frequency
H
D
overall
100
F I
1800 nH
1000 nH 560 nH
3300 nH
G J
A
390 nH
10
F I
E
terminal
Terminal wraparound:
Recommended
approx 0.01/0,25 both ends
Land Pattern
1
A B C
max max max D E F G H I J
0.071 0.047 0.037 0.010 0.030 0.011 0.038 0.040 0.025 0.025 inches
1,80 1,19 0,94 0,25 0,76 0,28 0,97 1,02 0,64 0,64 mm
0.1
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
0.01
10 100 1000
Frequency (MHz)
Document 894-2 Revised 10/12/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.
Impedance (kOhms) Inductance (nH)
Q Factor