Web Sample Tools & Support Document 1362-1 page & buy software & FAQ Chip Inductors 0805HP (2012) Halogen Exceptional Q values, even at high frequencies Wirewound construction for highest possible self resonance Free up to 9.5 GHz Tight tolerances 2% for most 2 5 6 7 Inductance Percent SRF typ DCR max Irms 1 3 4 Part number (nH) tolerance Q typ (MHz) (Ohms) (A) AEC 0805HP-2N6XJR 2.6 250 MHz 5 100 1500 MHz 9500 0.015 2.0 + Q200 125C 0805HP-6N2XJR 6.2 250 MHz 5 104 1000 MHz 7200 0.027 1.5 0805HP-6N8XJR 6.8 250 MHz 5 90 1000 MHz 6000 0.066 1.3 0805HP-11NX R 11 250 MHz 5,2 93 500 MHz 4750 0.039 1.6 0805HP-12NX R 12 250 MHz 5,2 91 500 MHz 4425 0.039 1.4 0805HP-13NX R 13 250 MHz 5,2 91 500 MHz 4100 0.039 1.4 0805HP-18NX R 18 250 MHz 5,2 95 500 MHz 3650 0.050 1.2 0805HP-33NX R 33 250 MHz 5,2 100 500 MHz 2410 0.087 1.1 0805HP-47NX R 47 200 MHz 5,2 105 500 MHz 2170 0.093 1.0 0805HP-56NX R 56 200 MHz 5,2 100 500 MHz 1815 0.122 0.95 0805HP-82NX R 82 150 MHz 5,2 103 500 MHz 1525 0.168 0.82 0805HP-101X R 100 150 MHz 5,2 100 500 MHz 1400 0.220 0.72 0805HP-121X R 120 150 MHz 5,2 80 250 MHz 1265 0.293 0.62 0805HP-151X R 150 100 MHz 5,2 80 250 MHz 1150 0.288 0.60 0805HP-181X R 180 100 MHz 5,2 77 250 MHz 1025 0.374 0.54 0805HP-221X R 220 100 MHz 5,2 75 250 MHz 930 0.426 0.50 0805HP-271X R 270 100 MHz 5,2 75 100 MHz 830 0.754 0.42 0805HP-331X R 330 100 MHz 5,2 54 100 MHz 770 1.004 0.36 0805HP-391X R 390 100 MHz 5,2 52 100 MHz 700 1.110 0.33 0805HP-471X R 470 50 MHz 5,2 52 100 MHz 640 1.559 0.28 0805HP-561X R 560 25 MHz 5,2 46 100 MHz 550 2.067 0.24 0805HP-681X R 680 25 MHz 5,2 46 100 MHz 535 2.355 0.21 0805HP-821X R 820 25 MHz 5,2 50 100 MHz 485 3.945 0.18 1. When ordering, specify tolerance, termination and packaging codes: Core material Ceramic Environmental RoHS compliant, halogen free 0805HP-821XJRC Terminations RoHS compliant matte tin over nickel over silver- Tolerance: G = 2% J = 5% glass frit. Other terminations available at additional cost. Termination: R = RoHS compliant matte tin over nickel over silver- Weight 9.5 12.5 mg glass frit Ambient temperature 40C to +125C with Irms current Special order: Q = RoHS tin-silver-copper (95.5/4/0.5) Maximum part temperature +140C (ambient + temp rise). over tin or P = non-RoHS tin-lead (63/37) over tin. Storage temperature Component: 40C to +140C. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic Tape and reel packaging: 40C to +80C tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with Resistance to soldering heat Max three 40 second reflows at leader and trailer ( 25 charge). +260C, parts cooled to room temperature between cycles D = 13 machine-ready reel. EIA-481 embossed plastic Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/C tape. Factory order only, not stocked (7500 parts per Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / full reel). 85% relative humidity) B = Less than full reel. In an effort to simplify our part Failures in Time (FIT) / Mean Time Between Failures (MTBF) numbering system, Coilcraft is eliminating the need 0.22 per billion hours / 4.545E+09 hours, calculated per Telcordia SR-332 for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. Packaging 2000/7 reel 7500/13 reel. Plastic tape: 8 mm wide, 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. PCB washing Tested to MIL-STD-202 Method 215 plus an additional 3. Tolerances in bold are stocked for immediate shipment. aqueous wash. See Doc787 PCB Washing.pdf. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD- D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 1362-1 Revised 05/10/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 1362-2 0805HP Series (2012) Typical Q vs Frequency Typical L vs Frequency 260 10,000 820 nH 240 12 nH 470 nH Halogen 220 220 nH Free 200 100 nH 1000 18 nH 180 47 nH 160 AEC 140 47 nH + Q200 125C 100 120 100 18 nH 100 nH 80 12 nH 220 nH 10 60 470 nH 40 820 nH 2.6 nH 20 0 1 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 10 Frequency (GHz) Frequency (GHz) B H overall C Pick and place E F material A G E F Terminal wraparound: D approx 0.007/0,18 both ends terminal Recommended LandPattern A B C D max max max ref E F G H 0.087 0.068 0.061 0.061 0.012 0.040 0.044 0.078 inches 2,21 1,73 1,55 1,55 0,30 1,02 1,12 1,98 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Document 1362-2 Revised 05/10/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Q Factor Inductance (nH)