Web Sample Tools & Support
Document 101-1
page & buy software & FAQ
Chip Inductors 1008CS Series (2520)
High SRF and excellent Q values Designers Kit C300 contains 10 each of all 5% tolerance values
Core material Ceramic
Tight tolerances, many values at 1%
Environmental RoHS compliant, halogen free
40 inductance values from 10 nH to 8.2 H
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 29.6 37.4 mg
Typical Q vs Frequency
Ambient temperature 40C to +125C with Irms current
Maximum part temperature +140C (ambient + temp rise).
120
Storage temperature Component: 40C to +140C.
100
Tape and reel packaging: 40C to +80C
Resistance to soldering heat Max three 40 second reflows at
100
47 nH
+260C, parts cooled to room temperature between cycles
90
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C
80 100 nH Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
12 nH
85% relative humidity)
70
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
60 One per billion hours / one billion hours, calculated per Telcordia SR-332
330 nH
Packaging 2000 per 7 reel; 7500 per 13 reel. Plastic tape: 8 mm wide,
50 750 nH
0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth
1800 nH
40 PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
30
20
B C
10
H
overall
D
0
Pick and
10 100 1000 10000
I
F place
Frequency (MHz)
material
A G J
F
Typical L vs Frequency
I
E
Terminal wraparound:
terminal
Recommended
approx 0.010/0,25 both ends
Land Pattern
A B C D
max max max ref E F G H I J
0.115 0.110 0.080 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches
2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Document 101-1 Revised 10/12/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.
Q FactorDocument 101-2
1008CS Series (2520)
2 5 6 7
Inductance Percent SRF min DCR max Irms Color
1 3 4 8
Part number (nH) tolerance Q min (MHz) (Ohms) (mA) code
1008CS-100X_E_ 10 @ 50 MHz 5,2 50 @ 500 MHz 4100 0.08 1000 Black
1008CS-120X_E_ 12 @ 50 MHz 5,2 50 @ 500 MHz 3300 0.09 1000 Red
1008CS-150X_E_ 15 @ 50 MHz 5,2 50 @ 500 MHz 2500 0.10 1000 Orange
1008CS-180X_E_ 18 @ 50 MHz 5,2 50 @ 350 MHz 2500 0.11 1000 Yellow
1008CS-220X_E_ 22 @ 50 MHz 5,2,1 55 @ 350 MHz 2400 0.12 1000 Blue
1008CS-270X_E_ 27 @ 50 MHz 5,2 55 @ 350 MHz 1600 0.13 1000 Black
1008CS-330X_E_ 33 @ 50 MHz 5,2 60 @ 350 MHz 1600 0.14 1000 Orange
1008CS-390X_E_ 39 @ 50 MHz 5,2,1 60 @ 350 MHz 1500 0.15 1000 Violet
1008CS-470X_E_ 47 @ 50 MHz 5,2,1 65 @ 350 MHz 1500 0.16 1000 Red
1008CS-560X_E_ 56 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.18 1000 Yellow
1008CS-680X_E_ 68 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.20 1000 Gray
1008CS-820X_E_ 82 @ 50 MHz 5,2,1 60 @ 350 MHz 1000 0.22 1000 Red
1008CS-101X_E_ 100 @ 25 MHz 5,2,1 60 @ 350 MHz 1000 0.56 650 Violet
1008CS-121X_E_ 120 @ 25 MHz 5,2,1 60 @ 350 MHz 950 0.63 650 White
1008CS-151X_E_ 150 @ 25 MHz 5,2,1 45 @ 100 MHz 850 0.70 580 Red
1008CS-181X_E_ 180 @ 25 MHz 5,2,1 45 @ 100 MHz 750 0.77 620 Orange
1008CS-221X_E_ 220 @ 25 MHz 5,2,1 45 @ 100 MHz 700 0.84 500 Green
1008CS-271X_E_ 270 @ 25 MHz 5,2,1 45 @ 100 MHz 600 0.91 500 White
1008CS-331X_E_ 330 @ 25 MHz 5,2,1 45 @ 100 MHz 570 1.05 450 Orange
1008CS-391X_E_ 390 @ 25 MHz 5,2,1 45 @ 100 MHz 500 1.12 470 Blue
1008CS-471X_E_ 470 @ 25 MHz 5,2,1 45 @ 100 MHz 450 1.19 470 Black
1008CS-561X_E_ 560 @ 25 MHz 5,2,1 45 @ 100 MHz 415 1.33 400 Green
1008CS-621X_E_ 620 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.40 300 Blue
1008CS-681X_E_ 680 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.47 400 Gray
1008CS-751X_E_ 750 @ 25 MHz 5,2,1 45 @ 100 MHz 360 1.54 360 Black
1008CS-821X_E_ 820 @ 25 MHz 5,2,1 45 @ 100 MHz 350 1.61 400 Brown
1008CS-911X_E_ 910 @ 25 MHz 5,2,1 35 @ 50 MHz 320 1.68 380 Red
1008CS-102X_E_ 1000 @ 25 MHz 5,2,1 35 @ 50 MHz 290 1.75 370 Yellow
1008CS-122X_E_ 1200 @ 7.9 MHz 5,2 35 @ 50 MHz 250 2.00 310 Blue
1008CS-132X_E_ 1300 @ 7.9 MHz 5,2 25 @ 50 MHz 200 2.25 310 Red
1008CS-152X_E_ 1500 @ 7.9 MHz 5,2 28 @ 50 MHz 200 2.3 330 Gray
1008CS-182X_E_ 1800 @ 7.9 MHz 5,2 28 @ 50 MHz 160 2.6 300 Brown
1008CS-222X_E_ 2200 @ 7.9 MHz 5,2 28 @ 50 MHz 160 2.8 280 Orange
1008CS-272X_E_ 2700 @ 7.9 MHz 5,2 22 @ 25 MHz 140 3.2 290 Green
1008CS-332X_E_ 3300 @ 7.9 MHz 5,2 22 @ 25 MHz 110 3.4 290 Violet
1008CS-392X_E_ 3900 @ 7.9 MHz 5,2 20 @ 25 MHz 100 3.6 260 Gray
1008CS-472X_E_ 4700 @ 7.9 MHz 5,2 20 @ 25 MHz 90 4.0 260 White
1008CS-562XJE_ 5600 @ 7.9 MHz 5 16 @ 7.9 MHz 20 4.0 240 Black
1008CS-682XJE_ 6800 @ 7.9 MHz 5 18 @ 7.9 MHz 40 4.9 200 Brown
1008CS-822XJE_ 8200 @ 2.5 MHz 5 18 @ 7.9 MHz 25 6.0 170 Red
1. When ordering, specify tolerance, termination and packaging codes: 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
1008CS-472XJEC
3. Tolerances in bold are stocked for immediate shipment.
Tolerance: F = 1% G = 2% J = 5% 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
(Table shows stock tolerances in bold.) fixture.
5. SRF measured using an Aglilent/HP 8753D network analyzer and a
Termination: E = Halogen free component. RoHS compliant silver-
Coilcraft SMD-D test fixture.
palladium-platinum-glass frit terminations.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
L = RoHS compliant, not halogen-free. Silver-palladi-
Coilcraft CCF840 test fixture.
um-platinum-glass frit terminations.
7. Current that causes a 15C temperature rise from 25C ambient. This
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
information is for reference only and does not represent absolute
or S = non-RoHS tin-lead (63/37).
maximum ratings.
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
8. Current production parts are marked with one dot. Prior production
tape (2000 per full reel).
parts were marked with three dots. Single color dots are not unique
B = Less than full reel. In tape, but not machine-ready.
identifiers and correspond to multiple inductance values. Part marking
To have a leader and trailer added ($25 charge),
does not indicate polarity.
use code letter C instead.
9. Electrical specifications at 25C.
D = 13 machine-ready reel. EIA-481 embossed plastic
Refer to Doc 362 Soldering Surface Mount Components before soldering.
tape. Factory order only, not stocked (7500 per full
reel).
Document 101-2 Revised 08/03/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.