Web Sample Tools & Support Document 163-1 page & buy software & FAQ Micro Spring Air Core Inductors Small air core inductors feature high Q and tight tolerances AEC + Q200 125C Acrylic jacket provides a flat top for pick and place Solder coated leads ensure reliable soldering Terminations RoHS compliant tin-silver over copper Other termina- tions available at additional cost. Weight 0906: 10 12 mg 1606: 18 27 mg Ambient temperature 40C to +125C with Irms current Maximum part temperature +140C (ambient + temp rise) Storage temperature Component: 40C to +140C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 0906: 500 per 7 reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth 1606: 500 per 7 reel Plastic tape: 12 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth Recommended pick and place nozzle: OD: 0.059 ID: 0.035 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 2 4 5 6 7 Part Inductance Percent Q SRF min DCR max Irms 1 3 number Turns (nH) tolerance min (GHz) (mOhm) (A) 0906-2 L 2 1.65 10,5,2 100 10.0 4.0 1.6 0906-3 L 3 2.55 5,2,1 100 8.2 5.0 1.6 0906-4 L 4 3.85 5,2,1 100 7.5 6.0 1.6 0906-5 L 5 5.40 5,2,1 100 7.0 8.0 1.6 1606-6 L 6 5.60 5,2,1 100 6.5 9.0 1.6 1606-7 L 7 7.15 5,2,1 100 6.0 10 1.6 1606-8 L 8 8.80 5,2,1 100 6.0 12 1.6 1606-9 L 9 9.85 5,2,1 100 5.2 13 1.6 1606-10 L 10 12.55 5,2,1 100 4.6 14 1.6 1. When ordering, specify tolerance, termination and packaging codes: 2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent with a Coilcraft SMD-A fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 1606-10GLC 4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/ Tolerance: F = 1% G = 2% J = 5% K = 10% (Table shows stock HP 16193A test fixture or equivalents. tolerances in bold.) 5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. SMD-D fixture. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). 6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter or equivalent. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic 7. Current that causes a 15C temperature rise from 25C ambient. This tape, 500 parts per full reel. Quantities less than full information is for reference only and does not represent absolute maxi- reel available: in tape (not machine ready) or with mum ratings. leader and trailer ( 25 charge) B = Less than full reel. In an effort to simplify our part 8. Electrical specifications at 25C. numbering system, Coilcraft is eliminating the need Refer to Doc 362 Soldering Surface Mount Components before soldering. for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. P = 7 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel). Document 163-1 Revised 05/10/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 163-2 Designers Kit C308 contains 12 each of all values. Designers Kit C308-2 contains12 each of all 2% values. Micro Spring Air Core Inductors Typical L vs Frequency 0906 Series Typical L vs Frequency 1606 Series 14 14 12.55 nH 12 12 AEC + Q200 125C 9.85 nH 10 10 8.80 nH 8 8 7.15 nH 6 6 5.60 nH 5.40 nH 4 4 3.85 nH 2.55 nH 2 2 1.65 nH 0 0 100 1000 100 1000 Frequency (MHz) Frequency (MHz) Typical Q vs Frequency 0906 Series Typical Q vs Frequency 1606 Series 250 250 2.55 nH 1.65 nH 7.15 nH 8.80 nH 3.85 nH 5.60 nH 5.40 nH 12.55 nH 200 200 9.85 nH 150 150 100 100 50 50 0 0 100 1000 100 1000 Frequency (MHz) Frequency (MHz) Recommended Land Patterns Pick and place A D surface E 0906 Size 1606 Size 0.031 0.031 0,79 0,79 C 0.097 0.097 0.040 2,46 0.040 2,46 B 1,02 1,02 F SizeA maxB max C max DE F max 0906 0.095 0.135 0.060 0.055 0.010 0.072 0.010 0.020 0.072 0.144 2,41 3,43 1,52 1,40 0,25 1,83 0,25 0,51 1,83 3,66 135 1606 0.165 0.135 0.062 0.055 0.010 0.144 0.012 0.020 Strip max 4,19 3,43 1,58 1,40 0,25 3,66 0,30 0,51 Length inches Dimensions are in mm 0 min Document 163-2 Revised 05/10/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (nH) Q factor Q factor Inductance (nH)