Document 1412-1 Shielded Power Inductor XEL5030 Halogen Extremely low DCR and ultra low AC losses for high switching Free frequencies (2 to 5 MHz) Superior current handling with soft saturation characteristics AEC-Q200 Grade 1 (40C to +125C) Can withstand high current spike AEC Core material Composite + Q200 125C Environment RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 0.39 0.58 g Operating voltage 0 80 V Ambient temperature 40C to +125C with (40C) Irms current. Maximum part temperature +165C (ambient + temp rise). Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 400/7 reel 1500/13 reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.18 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 6 2 DCR (mOhms) 4 5 Irms (A) Inductance SRF typ Isat 1 Irms Testing Part number 20% (H) typ max (MHz) (A) 20C rise 40C rise Irms testing was performed on XEL5030-131ME 0.13 1.53 1.83 187 44.0 25.0 35.0 0.75 inch wide 0.25 inch thick XEL5030-261ME 0.26 2.16 2.60 117 31.0 22.5 30.5 copper traces in still air. XEL5030-421ME 0.42 3.00 3.60 84 23.5 18.0 25.0 Temperature rise is highly XEL5030-601ME 0.60 4.44 5.33 64 22.0 15.6 21.4 dependent on many factors XEL5030-102ME 1.0 7.00 8.40 51 16.9 11.4 15.4 including pcb land pattern, XEL5030-122ME 1.2 8.80 10.5 49 15.3 10.4 14.4 trace size, and proximity to XEL5030-152ME 1.5 9.90 11.9 45 15.0 8.6 12.2 other components. Therefore XEL5030-222ME 2.2 13.2 14.5 36 10.5 7.2 9.7 temperature rise should XEL5030-332ME 3.3 21.2 23.3 28 8.40 5.9 8.1 be verified in application XEL5030-472ME 4.7 36.0 40.0 23 6.70 4.3 5.9 conditions. 1. When ordering, please specify termination and packaging codes: XEL5030-472MEC Termination: E = RoHS compliant tin-silver over copper. Special order: S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 1412-1 Revised 11/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. VERYLOWAC ANDDCLOSSESXXX Document 1412-2 Shielded Power Inductors XEL5030 0.208 0.008 L vs Frequency 5,28 0,2 10 4.7 H Halogen 0.216 0.008 Free 3.3 H 5,48 0,2 2.2 H 1.5 H 1.2 H Dash Indicates direction of terminals and AEC 1 + number start (short) lead. Connect high dv/dt Q200 125C 1.0 H here forlowest EMI. 0.60 H 0.42 H See table 0.26 H 0.13 H 0.039 0.002 0.165 typ 1,0 0,05 4,2 0.1 0.091 0.010 0.1 1 10 100 1000 2,31 0.25 Frequency (MHz) * Height Dash max 0.130 number (in / mm) 3,31 -131 0.126 / 3.2 -261 0.126 / 3.2 -421 0.126 / 3.2 -601 0.126 / 3.2 0.185 -102 0.122 / 3.1 4,70 -122 0.122 / 3.1 -152 0.122 / 3.1 -222 0.122 / 3.1 -332 0.122 / 3.1 0.046 -472 0.122 / 3.1 1,18 * For optional tin-lead terminations, Recommended dimensions are for the mounted part. Land Pattern Dimensions before mounting can be an additional 0.005 inch / 0.13 mm. inches Dimensions are in mm Document 1412-2 Revised 11/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. HIGH TEMPERATURE Inductance (H)