CCDLF 10000L X Web Sample Tools & Support Document 511-1 page & buy software & FAQ SMT Data Line EMI Filter CCDLF See our PDLF series for 4, 3 and 2-line EMI filters and CDF AEC + Q200 85C for 8-line filters Exceptional common mode noise attenuation from 15 MHz to 300 MHz passes signal line data below 300 MHz with minimal attenuation Core material Ferrite Terminations RoHS compliant tin-silver-copper over silver-platinum. Weight 670 mg Ambient temperature 40C to +85C Storage temperature Component: 40C to +85C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 10.06 per billion hours / 9.940E+07 hours, calculated per Telcordia SR-332 Packaging 1000/13 reel Plastic tape: 16 mm wide, 10.28 mm thick, 12 mm pocket spacing, 5.0 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. Common mode Cutoff 2 4 5 6 peak impedance frequency Inductance DCR max Isolation Current 1 3 Part number Lines (Ohms) (GHz) min (H) (mOhms) (Vrms) (mAdc) CCDLF 10000L 10 523.54 43 MHz 0.043 5 250 300 100 2. Frequency at which the differential mode attenuation equals 3 dB 1. When ordering, please specify termination and packaging codes: 3. Inductance shown for each winding, measured at 1 MHz CCDLF 8500LD 4. DCR is for each winding. Termination L = RoHS compliant tin-silver-copper over silver-platinum 5. Interwinding isolation (hipot) tested for one minute. Special order: S = non-RoHS tin-lead (63/37). 6. Current rating is for each line. Packaging D = 13 machine ready reel. EIA-481 embossed plastic Refer to Doc 362 Soldering Surface Mount Components before soldering. tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). 16 17 18 19 20 5 4 3 2 1 B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D. 15 14 13 12 11 6 7 8 9 10 0.060 0.040 Dot indicates pin 1 ref typ 0.020 0.030 1,52 1,02 5 4 3 2 1 0,51 0,76 0.030 6 20 0,76 7 19 0.360 0.270 0.230 max 8 18 9,14 6,86 5,84 17 9 0.050 cen 0.050 cen 1,27 1 10 16 1,27 0.050 1,27 20 11 12 13 14 15 Internal code 0.360 0.170 max max Recommended 9,14 4,32 Land Pattern inches Dimensions are in mm Document 511-1 Revised 12/21/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. No longer available. Effective October 1, 2021, the CCDLF Series is no longer available. It has been replaced by the CDF Series which is electrically identical and uses the same land pattern.Document 511-2 CCDLF 10000 Surface Mount Data Line EMI Filter Attenuation (Ref: 50 Ohms) 0 AEC Common mode + Q200 85C Differential mode 10 20 30 0.1 1.0 10 100 1000 Frequency (MHz) Impedance vs Frequency 10,000 1000 100 10 1 Common mode Differential mode 0.1 0.1 110 100 1000 Frequency (MHz) Document 511-2 Revised 12/21/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Impedance (Ohms) Attenuation (dB)