Web Sample Tools & Support Document 295 -1 page & buy software & FAQ SMT Power Inductors - DO3314 Only 3.3 mm square, 1.4 mm high AEC + Q200 85C Handles current up to 1.7 Amps rms Designers Kit C358 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 45.9 50.2 mg Ambient temperature 40C to +85C with Irms current Maximum part temperature +125C( ambient + temp rise) Storage temperature Component: 40C to +125C Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 2 3 4 1. When ordering, please specify termination and packaging codes: L DCR SRF 5 6 20% max typ Isat Irms DO3314-333MLC 1 Part number (H) (Ohms) (MHz) (A) (A) Termination: L = RoHS compliant silver-palladium-platinum-glass frit DO3314-102ML 1.0 0.11 160 2.10 1.70 Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). DO3314-152ML 1.5 0.14 140 2.00 1.40 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic DO3314-222ML 2.2 0.20 90 1.60 1.30 tape (1000 parts per full reel). Quantities less than DO3314-332ML 3.3 0.26 80 1.40 1.20 full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). DO3314-472ML 4.7 0.32 60 1.20 1.10 D = 13 machine-ready reel. EIA-481 embossed plastic DO3314-682ML 6.8 0.44 45 0.92 0.80 tape (3500 parts per full reel). DO3314-822ML 8.2 0.47 45 0.90 0.75 B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need DO3314-103ML 10 0.52 40 0.80 0.75 for multiple packaging codes. When ordering, simply DO3314-153ML 15 0.86 30 0.68 0.65 change the last letter of your part number from B to C. DO3314-223ML 22 1.20 20 0.56 0.50 2. Inductance tested at 100 kHz, 0.1 Vrms. DO3314-333ML 33 1.62 15 0.51 0.40 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4191A or equivalent. 5. DC current at which the inductance drops 10% (typ) from its value without current. 6. Current that causes a 40C temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering Document 295-1 Revised 12/13/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 295-2 SMT Power Inductors - DO3314 Series Typical L vs Frequency Typical L vs Current 100 100 AEC 33 H + Q200 85C 33 H 10 H 10 10 10.0 H 3.3 H 3.3 H 1H 1.0 H 1 1 0.1 0.1 0.01 0.1 1 10 0.01 0.1 110 Frequency (MHz) Current (A) Internal code 0.130 0.008 3,3 0,2 Dash number 0.130 0.008 3,3 0,2 Recommended Land Pattern 0.055 0.024 max 1,4 0,61 0.049 1,24 0.025 0.148 0,64 3,76 0.040 0.005 0.050 1,02 0,127 1,27 0.148 inches 3,76 Dimensions are in mm Document 295-2 Revised 12/13/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) XXXY Inductance (H)