Document 479-1 SMT Power Inductors DO5040H Heavy gauge wire and self-leaded terminations for low DCR AEC + Q200 85C Saturation current ratings as high as 33.4 A Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 5.8 7.6 g (2.8 12 H) 5.7 7.0 g (15 1400 H) Ambient temperature 40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 4 1. When ordering, please specify termination and packaging codes: DCR SRF 2 4 5 Inductance max typ Isat Irms DO5040H-104MLD 1 Part number (H) (mOhms) (MHz) (A) (A) Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. DO5040H-282ML 2.8 20% 5.2 65 33.4 12.1 Special order: DO5040H-392ML 3.9 20% 6.0 40 26.8 11.2 T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). DO5040H-682ML 6.8 20% 9.0 30 22.5 9.6 Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic DO5040H-103ML 10 20% 11 22 17.8 8.6 tape (175 parts per full reel). DO5040H-123ML 12 20% 13 21 15.9 7.4 B = Less than full reel. In tape, but not machine ready. DO5040H-153ML 15 20% 20 18 13.8 6.5 To have a leader and trailer added ( 25 charge), use code letter C instead. DO5040H-183ML 18 20% 22 14 13.2 6.0 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using Coilcraft DO5040H-223ML 22 20% 24 13 11.8 5.7 SMD-A fixture in Agilent/HP 4284A impedance analyzer. DO5040H-333ML 33 20% 37 10 9.6 4.5 3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft DO5040H-473ML 47 20% 52 8.0 7.8 3.7 SMD- D test fixture. DO5040H-683ML 68 20% 67 7.0 6.7 3.4 4. DC current at which the inductance drops 10% (typ) from its value with- out current. DO5040H-104ML 100 20% 115 6.0 5.6 2.8 5. Current that causes a 40C temperature rise from 25C ambient. DO5040H-334KL 330 10% 325 3.0 3.0 1.5 6. Electrical specifications at 25C. DO5040H-684KL 680 10% 780 1.6 2.0 1.1 Refer to Doc 362 Soldering Surface Mount Components before soldering. DO5040H-145KL 1400 10% 1300 1.0 1.5 0.7 Document 479-1 Revised 10/04/18 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sgXXX XXX X X Document 479-2 SMT Power Inductors - DO5040H Series 2.8 H 12 H Typical L vs Current 1000 Internal Dash 0.500 code number 12,7 AEC + Q200 85C 0.472 0.640 max max 100 H 12,00 16,26 100 0.880 max 33 H 22,35 0.561 min 0.125 12 H 14,25 3,18 10 0.470 0.340 0.010 0.450 max 2.8 H 11,94 8,64 0,25 11,43 0.690 0.125 1 max 17,53 3,18 1 10 100 0.1 0.815 Recommended Current (A) max 20,70 Land Pattern Dash Number of number wire wraps Typical L vs Frequency -282 2 -392 2 1000 -682 2 -103 2 -123 2 15 H 1400 H 100 H 100 Internal Dash 0.500 code number 12,7 33 H 0.472 0.600 max max 12,00 15,24 12 H 10 0.730 max 18,54 2.8 H 0.561 min 0.200 14,25 max 0.075 5,08 1,90 1 0.001 0.01 0.1 1 10 0.250 6,35 Frequency (MHz) 0.626 0.065 15,90 max 1,65 Recommended 0.710 max Land Pattern 18,03 Dash Number of number wire wraps -153 1 -183 1 -223 1 -333 1 -473 1 -683 1 -104 1 inches -334 2 Dimensions are in mm -684 3 -145 4 Packaging 175 per 13 reel 2.8 12 H parts Plastic tape: 44 mm wide, 0.5 mm thick, 24 mm pocket spacing, 12.8 mm pocket depth 15 1400 H parts Plastic tape: 32 mm wide, 0.4 mm thick, 24 mm pocket spacing, 12.1 mm pocket depth Document 479-2 Revised 10/04/18 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sg Inductance (H) Inductance (H)