Web Sample Tools & Support Document 615-1 page & buy software & FAQ Shielded Power Inductors EPL3010 Low profile shielded power inductors, 3 3 1 mm Extremely low DCR,high SRF ratings, Isat ratings up to 2.2 A Designers Kit C431 contains 5 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight 32 38 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7 reel 7500/13 reel Plastic tape: 8 mm wide, 0.20 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 2 3 3 4 Isat (A) Irms (A) Inductance DCR nom DCR max SRF typ 1 Part number 20% (H) (Ohms) (Ohms) (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise EPL3010-301ML 0.30 0.040 0.045 249 1.0 1.6 2.2 1.7 2.2 EPL3010-102ML 1.0 0.071 0.078 151 0.80 1.3 1.8 1.2 1.7 EPL3010-152ML 1.5 0.086 0.095 116 0.68 1.1 1.6 1.2 1.6 EPL3010-222ML 2.2 0.137 0.150 98 0.54 0.92 1.3 0.98 1.3 EPL3010-472ML 4.7 0.278 0.306 60 0.36 0.61 0.80 0.74 0.99 EPL3010-103ML 10 0.573 0.631 38 0.20 0.34 0.48 0.52 0.70 EPL3010-223ML 22 1.25 1.38 27 0.18 0.30 0.42 0.35 0.47 1. When ordering, please specify packaging code: EPL3010-103MLC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ( 25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A network analyzer or equivalent. 5. DC current at 25C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 615-1 Revised 10/09/17 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 615-2 SMT Power Inductors EPL3010 Series L vs Frequency L vs Current 100 100 22 H 22 H 10 H 10 10 4.7 H 10 H 2.2 H 4.7 H 1.5 H 2.2 H 1 1 1.5 H 1.0 H 1.0 H 0.30 H 0.30 H 0.1 0.1 0.01 0.1 1 10 10 100 0.1 1 Current (A) Frequency (MHz) 2nd Part Marking (Parts manufactured prior to Oct. 20, 2009 may not be marked.) significant digit Part number Value 1st digit 2nd digit Multiplier EPL3010-301 0.27 H Orange Black Brown EPL3010-102 1.0 H Brown Black Red 0.118 0.008 EPL3010-152 1.5 H Brown Green Red 3,0 0,2 EPL3010-222 2.2 H Red Red Red EPL3010-472 4.7 H Yellow Violet Red EPL3010-103 10 H Brown Black Orange 1st EPL3010-223 22 H Red Red Orange significant 0.118 0.008 Multiplier digit 3,0 0,2 Note: All marked parts have three dots. Black dot, used only on -301, -102 and PartMarking -103 as second significant digit, may be very difficult to see. 0.043 max 1,1 Start Finish 0.080 2,03 0.106 0.008 0.114 2,69 0,20 2,90 0.030 0.008 0.039 0,77 0,20 0.043 1,0 min 1,10 Recommended 0.050 typ LandPattern 1,26 inches Dimensions are in mm Small surface blemishes are not unusual and do not adversely affect performance. Wire may be visible inside the voids. Acceptable void sizes: Top: 0.01 in / 0,254 mm 0.01 in / 0,254 mm Sides: 0.02 in / 0,5 mm 0.047 in / 1,2 mm Document 615-2 Revised 10/09/17 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)