Web Sample Tools & Support Document 438-1 page & buy software & FAQ Shielded Power Inductors LPS3008 Halogen Very low DCR excellent current handling Free Only 0.8 mm tall 3.0 3.0 mm footprint Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss AEC Environmental RoHS compliant, halogen free + Q200 85C Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 22 25 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.27 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3008-184MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3008-561MR 0.56 0.072 330 1.8 2.0 2.1 1.4 2.0 Special order, added cost: LPS3008-801MR 0.80 0.092 255 1.6 1.7 1.8 1.1 1.6 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3008-102MR 1.0 0.125 220 1.3 1.4 1.5 0.90 1.3 or P = non-RoHS tin-lead (63/37). LPS3008-152MR 1.5 0.134 170 1.1 1.3 1.3 0.87 1.2 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts LPS3008-222MR 2.2 0.175 150 1.0 1.1 1.1 0.85 1.1 per full reel). Quantities less than LPS3008-332MR 3.3 0.285 114 0.81 0.86 0.88 0.74 0.95 full reel available: in tape (not LPS3008-472MR 4.7 0.350 87 0.68 0.73 0.74 0.68 0.80 machine ready) or with leader and trailer ( 25 charge). LPS3008-562MR 5.6 0.450 78 0.62 0.67 0.70 0.58 0.73 B = Less than full reel. In an effort to LPS3008-682MR 6.8 0.500 75 0.58 0.61 0.63 0.50 0.67 simplify our part numbering system, LPS3008-822MR 8.2 0.600 61 0.52 0.56 0.58 0.45 0.60 Coilcraft is eliminating the need for multiple packaging codes. When LPS3008-103MR 10 0.650 56 0.46 0.51 0.52 0.42 0.56 ordering, simply change the last let- LPS3008-123MR 12 0.790 49 0.45 0.48 0.50 0.38 0.50 ter of your part number from B to C. LPS3008-183MR 18 1.25 38 0.35 0.38 0.40 0.33 0.44 D = 13 machine-ready reel. EIA-481 LPS3008-223MR 22 1.50 35 0.29 0.33 0.34 0.29 0.38 embossed plastic tape. Factory order only, not stocked (3500 parts LPS3008-333MR 33 2.30 23 0.27 0.30 0.31 0.25 0.32 per full reel). LPS3008-473MR 47 3.00 21 0.22 0.23 0.24 0.21 0.27 2. Inductance tested at 100 kHz, 0.1 Vrms using an LPS3008-683MR 68 4.75 18 0.18 0.19 0.20 0.175 0.23 Agilent/HP 4192A. Inductance at 1 MHz is the same LPS3008-104MR 100 6.85 14 0.15 0.16 0.16 0.160 0.21 for parts with SRF 10 MHz. LPS3008-124MR 120 7.00 13 0.084 0.094 0.10 0.140 0.190 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or LPS3008-154MR 150 8.00 11 0.080 0.088 0.092 0.130 0.175 equivalent. LPS3008-184MR 180 9.00 10 0.070 0.078 0.082 0.120 0.160 5. DC current at 25C that causes the specified in - ductance drop from its value without current. lick for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference Coilcraft Designers Kit C392 contains samples of 0.56 H to 33 H parts (3 each) only and does not represent absolute maximum rat- from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to ings. Click for temperature derating information. 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 7. Electrical specifications at 25C. 220 H to 2200 H parts (3 each) from all five series. For details of kit contents and Refer to Doc 362 Soldering Surface Mount Compo- to order, contact Coilcraft or visit 123 123 123 Document 438-2 Shielded Power Inductors LPS3008 Series Typical L vs Current Typical L vs Frequency 1000 1000 330H 330H Halogen 100H Free 100 100 100H 33H 33H 10H 10 10 AEC 10H + Q200 85C 3.3H 3.3H 1.0H 1 1 1.0H 0.1 0.1 0.01 0.1 1 10 0.01 0.1 1 10 Current (A) Frequency (MHz) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.27 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 438-2 Revised 10/21/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)