Document 438-1 Shielded Power Inductors LPS3008 Very low DCR excellent current handling Only 0.8 mm tall 3.0 3.0 mm footprint Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 22 25 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3008-104MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3008-561MR 0.56 0.072 330 1.8 2.0 2.1 1.4 2.0 Special order, added cost: LPS3008-801MR 0.80 0.092 255 1.6 1.7 1.8 1.1 1.6 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3008-102MR 1.0 0.125 220 1.3 1.4 1.5 0.90 1.3 or P = non-RoHS tin-lead (63/37). LPS3008-152MR 1.5 0.134 170 1.1 1.3 1.3 0.87 1.2 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts LPS3008-222MR 2.2 0.175 150 1.0 1.1 1.1 0.85 1.1 per full reel). LPS3008-332MR 3.3 0.285 114 0.81 0.86 0.88 0.74 0.95 B = Less than full reel. In tape, but not LPS3008-472MR 4.7 0.350 87 0.68 0.73 0.74 0.68 0.80 machine ready. To have a leader and trailer added ( 25 charge), use LPS3008-562MR 5.6 0.450 78 0.62 0.67 0.70 0.58 0.73 code letter C instead. LPS3008-682MR 6.8 0.500 75 0.58 0.61 0.63 0.50 0.67 D = 13 machine-ready reel. EIA-481 LPS3008-822MR 8.2 0.600 61 0.52 0.56 0.58 0.45 0.60 embossed plastic tape. Factory order only, not stocked (3500 parts LPS3008-103MR 10 0.650 56 0.46 0.51 0.52 0.42 0.56 per full reel). LPS3008-123MR 12 0.790 49 0.45 0.48 0.50 0.38 0.50 2. Inductance tested at 100 kHz, 0.1 Vrms using an LPS3008-183MR 18 1.25 38 0.35 0.38 0.40 0.33 0.44 Agilent/HP 4192A. Inductance at 1 MHz is the same LPS3008-223MR 22 1.50 35 0.29 0.33 0.34 0.29 0.38 for parts with SRF 10 MHz. LPS3008-333MR 33 2.30 23 0.27 0.30 0.31 0.25 0.32 3. DCR measured on a micro-ohmmeter. LPS3008-473MR 47 3.00 21 0.22 0.23 0.24 0.21 0.27 4. SRF measured using an Agilent/HP 8753ES or LPS3008-683MR 68 4.75 18 0.18 0.19 0.20 0.175 0.23 equivalent. 5. DC current at 25C that causes the specified in - LPS3008-104MR 100 6.85 14 0.15 0.16 0.16 0.160 0.21 ductance drop from its value without current. lick for LPS3008-124MR 120 7.00 13 0.084 0.094 0.10 0.140 0.190 temperature derating information. LPS3008-154MR 150 8.00 11 0.080 0.088 0.092 0.130 0.175 6. Current that causes the specified temperature rise LPS3008-184MR 180 9.00 10 0.070 0.078 0.082 0.120 0.160 from 25C ambient. This information is for reference only and does not represent absolute maximum rat- ings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Compo- Coilcraft Designers Kit C392 contains samples of 0.80 H to 33 H parts (3 each) nents before soldering. from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 H to 3300 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit 123 123 123 Document 438-2 Shielded Power Inductors LPS3008 Series Typical L vs Current Typical L vs Frequency 1000 1000 330H 330H 100H 100 100 100H 33H 33H 10H 10 10 10H 3.3H 3.3H 1.0H 1 1 1.0H 0.1 0.1 0.01 0.1 1 10 0.01 0.1 1 10 Current (A) Frequency (MHz) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 438-2 Revised 09/1/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2016 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)