Web Sample Tools & Support Document 428-1 page & buy software & FAQ Shielded Power Inductors LPS3010 Halogen Ultra small 3.0 3.0 mm footprint less than 1.0 mm tall Free Very low DCR excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss AEC Environmental RoHS compliant, halogen free + Q200 85C Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 25 32 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.27 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3010-224MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3010-471MR 0.47 0.070 370 1.8 1.9 2.0 1.3 1.80 Special order, added cost: LPS3010-681MR 0.68 0.080 270 1.6 1.7 1.7 1.3 1.75 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3010-102MR 1.0 0.085 230 1.5 1.6 1.6 1.1 1.50 or P = non-RoHS tin-lead (63/37). LPS3010-152MR 1.5 0.120 165 1.3 1.4 1.4 1.05 1.40 Packaging: C = 7 machine-ready reel. EIA-481 em- bossed plastic tape (1000 parts per LPS3010-182MR 1.8 0.150 150 1.2 1.2 1.3 1.00 1.40 full reel). Quantities less than full LPS3010-222MR 2.2 0.220 130 1.3 1.4 1.4 0.90 1.10 reel available: in tape (not machine LPS3010-332MR 3.3 0.220 110 0.83 0.88 0.90 0.85 1.10 ready) or with leader and trailer ( 25 charge). LPS3010-472MR 4.7 0.300 92 0.72 0.75 0.77 0.70 0.95 D = 13 machine-ready reel. EIA-481 LPS3010-562MR 5.6 0.400 80 0.67 0.69 0.71 0.60 0.78 embossed plastic tape. Factory LPS3010-682MR 6.8 0.450 70 0.61 0.63 0.64 0.56 0.74 order only, not stocked (3500 parts per full reel). LPS3010-822MR 8.2 0.520 62 0.56 0.59 0.59 0.53 0.70 B = Less than full reel. In an effort to LPS3010-103MR 10 0.540 58 0.50 0.53 0.55 0.48 0.64 simplify our part numbering system, LPS3010-123MR 12 0.700 47 0.46 0.49 0.50 0.44 0.58 Coilcraft is eliminating the need for LPS3010-153MR 15 0.950 43 0.41 0.43 0.44 0.37 0.48 multiple packaging codes. When ordering, simply change the last let- LPS3010-183MR 18 1.10 40 0.38 0.40 0.41 0.33 0.47 ter of your part number from B to C. LPS3010-223MR 22 1.20 36 0.32 0.35 0.36 0.30 0.41 2. Inductance tested at 100 kHz, 0.1 Vrms using an LPS3010-333MR 33 2.00 27 0.25 0.27 0.28 0.26 0.35 Agilent/HP 4192A. Inductance at 1 MHz is the same LPS3010-473MR 47 3.20 21 0.23 0.24 0.25 0.22 0.31 for parts with SRF 10 MHz. LPS3010-683MR 68 3.50 21 0.20 0.21 0.22 0.20 0.28 3. DCR measured on a micro-ohmmeter. LPS3010-104MR 100 5.25 14 0.14 0.16 0.17 0.18 0.24 4. SRF measured using an Agilent/HP 8753ES or equivalent. LPS3010-124MR 120 6.10 12 0.13 0.15 0.15 0.14 0.19 5. DC current at 25C that causes the specified induc - LPS3010-154MR 150 9.15 11 0.13 0.14 0.14 0.13 0.17 tance drop from its value without current. Click for LPS3010-184MR 180 10.1 9 0.11 0.12 0.13 0.11 0.15 temperature derating information. LPS3010-224MR 220 12.5 8 0.10 0.11 0.12 0.095 0.13 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum rat- Coilcraft Designers Kit C392 contains samples of 0.56 H to 33 H parts (3 each) ings. Click for temperature derating information. from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 7. Electrical specifications at 25C. 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of Refer to Doc 362 Soldering Surface Mount Components 220 H to 2200 H parts (3 each) from all five series. For details of kit contents and before soldering. to order, contact Coilcraft or visit 123 123 123 Document 428-2 Shielded SMT Power Inductors LPS3010 Series L vs Frequency L vs Current 1000 1000 330 H 330 H Halogen Free 100 100 68 H 68 H 33 H 33 H 6.8 H AEC 6.8 H 10 10 + Q200 85C 3.3 H 3.3 H 1 0.68 H 1 0.68 H 0.1 0.1 0.01 0.1 1 10 0.01 0.1 1 10 Frequency (MHz) Current (A) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.27 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 428-2 Revised 10/21/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)