Web Sample Tools & Support
Document 428-1
page & buy software & FAQ
Shielded Power Inductors LPS3010
Ultra small 3.0 3.0 mm footprint; less than 1.0 mm tall
Very low DCR; excellent current handling
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 25 32 mg
Ambient temperature 40C to +85C with (40C rise) Irms current.
Maximum part temperature +125C (ambient + temp rise). Derating.
Storage temperature Component: 40C to +125C.
Tape and reel packaging: 40C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
5 6 1. Please specify termination and packaging codes:
Isat (A) Irms (A)
DCR SRF
2 3 4
Inductance max typ 10% 20% 30% 20C 40C
LPS3010-223MRC
1
Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise
Termination: R = RoHS compliant matte tin over
nickel over silver.
LPS3010-471MR_ 0.47 0.070 370 1.8 1.9 2.0 1.3 1.80
Special order, added cost:
LPS3010-681MR_ 0.68 0.080 270 1.6 1.7 1.7 1.3 1.75
Q = RoHS tin-silver-copper (95.5/4/0.5)
LPS3010-102MR_ 1.0 0.085 230 1.5 1.6 1.6 1.1 1.50
or P = non-RoHS tin-lead (63/37).
LPS3010-152MR_ 1.5 0.120 165 1.3 1.4 1.4 1.05 1.40
Packaging: C = 7 machine-ready reel. EIA-481
embossed plastic tape (1000 parts
LPS3010-182MR_ 1.8 0.150 150 1.2 1.2 1.3 1.00 1.40
per full reel).
LPS3010-222MR_ 2.2 0.220 130 1.3 1.4 1.4 0.90 1.10
B = Less than full reel. In tape, but not
LPS3010-332MR_ 3.3 0.220 110 0.83 0.88 0.90 0.85 1.10
machine ready.
To have a leader and trailer added
LPS3010-472MR_ 4.7 0.300 92 0.72 0.75 0.77 0.70 0.95
($25 charge), use code letter C
LPS3010-562MR_ 5.6 0.400 80 0.67 0.69 0.71 0.60 0.78
instead.
LPS3010-682MR_ 6.8 0.450 70 0.61 0.63 0.64 0.56 0.74
D = 13 machine-ready reel. EIA-481
LPS3010-822MR_ 8.2 0.520 62 0.56 0.59 0.59 0.53 0.70 embossed plastic tape. Factory
order only, not stocked (3500 parts
LPS3010-103MR_ 10 0.540 58 0.50 0.53 0.55 0.48 0.64
per full reel).
LPS3010-123MR_ 12 0.700 47 0.46 0.49 0.50 0.44 0.58
2. Inductance tested at 100 kHz, 0.1 Vrms using an
LPS3010-153MR_ 15 0.950 43 0.41 0.43 0.44 0.37 0.48
Agilent/HP 4192A. Inductance at 1 MHz is the same
LPS3010-183MR_ 18 1.10 40 0.38 0.40 0.41 0.33 0.47
for parts with SRF 10 MHz.
LPS3010-223MR_ 22 1.20 36 0.32 0.35 0.36 0.30 0.41 3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or
LPS3010-333MR_ 33 2.00 27 0.25 0.27 0.28 0.26 0.35
equivalent.
LPS3010-473MR_ 47 3.20 21 0.23 0.24 0.25 0.22 0.31
5. DC current at 25C that causes the specified induc -
LPS3010-683MR_ 68 3.50 21 0.20 0.21 0.22 0.20 0.28
tance drop from its value without current. Click for
LPS3010-104MR_ 100 5.25 14 0.14 0.16 0.17 0.18 0.24
temperature derating information.
LPS3010-124MR_ 120 6.10 12 0.13 0.15 0.15 0.14 0.19 6. Current that causes the specified temperature rise
from 25C ambient. This information is for reference
LPS3010-154MR_ 150 9.15 11 0.13 0.14 0.14 0.13 0.17
only and does not represent absolute maximum rat-
LPS3010-184MR_ 180 10.1 9 0.11 0.12 0.13 0.11 0.15
ings. Click for temperature derating information.
LPS3010-224MR_ 220 12.5 8 0.10 0.11 0.12 0.095 0.13
7. Electrical specifications at 25C.
Refer to Doc 362 Soldering Surface Mount Components
Coilcraft Designers Kit C392 contains samples of 0.80 H to 33 H parts (3 each)
before soldering.
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to
33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 H to 3300 H parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit 123
123
123
Document 428-2
Shielded SMT Power Inductors LPS3010 Series
L vs Frequency L vs Current
1000
1000
330 H
330 H
100 100
68 H 68 H
33 H
33 H
6.8 H
6.8 H 10
10
3.3 H 3.3 H
1 0.68 H 1 0.68 H
0.1 0.1
0.01 0.1 1 10
0.01 0.1 1 10
Frequency (MHz) Current (A)
Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90 in the
packaging tape compared to previous versions of this product.
NEW OLD
123 123 123
inches
Dimensions are in
mm
Document 428-2 Revised 09/01/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.
Inductance (H)
Inductance (H)