Web Sample Tools & Support Document 428-1 page & buy software & FAQ Shielded Power Inductors LPS3010 Ultra small 3.0 3.0 mm footprint less than 1.0 mm tall Very low DCR excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 25 32 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3010-223MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3010-471MR 0.47 0.070 370 1.8 1.9 2.0 1.3 1.80 Special order, added cost: LPS3010-681MR 0.68 0.080 270 1.6 1.7 1.7 1.3 1.75 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3010-102MR 1.0 0.085 230 1.5 1.6 1.6 1.1 1.50 or P = non-RoHS tin-lead (63/37). LPS3010-152MR 1.5 0.120 165 1.3 1.4 1.4 1.05 1.40 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts LPS3010-182MR 1.8 0.150 150 1.2 1.2 1.3 1.00 1.40 per full reel). LPS3010-222MR 2.2 0.220 130 1.3 1.4 1.4 0.90 1.10 B = Less than full reel. In tape, but not LPS3010-332MR 3.3 0.220 110 0.83 0.88 0.90 0.85 1.10 machine ready. To have a leader and trailer added LPS3010-472MR 4.7 0.300 92 0.72 0.75 0.77 0.70 0.95 ( 25 charge), use code letter C LPS3010-562MR 5.6 0.400 80 0.67 0.69 0.71 0.60 0.78 instead. LPS3010-682MR 6.8 0.450 70 0.61 0.63 0.64 0.56 0.74 D = 13 machine-ready reel. EIA-481 LPS3010-822MR 8.2 0.520 62 0.56 0.59 0.59 0.53 0.70 embossed plastic tape. Factory order only, not stocked (3500 parts LPS3010-103MR 10 0.540 58 0.50 0.53 0.55 0.48 0.64 per full reel). LPS3010-123MR 12 0.700 47 0.46 0.49 0.50 0.44 0.58 2. Inductance tested at 100 kHz, 0.1 Vrms using an LPS3010-153MR 15 0.950 43 0.41 0.43 0.44 0.37 0.48 Agilent/HP 4192A. Inductance at 1 MHz is the same LPS3010-183MR 18 1.10 40 0.38 0.40 0.41 0.33 0.47 for parts with SRF 10 MHz. LPS3010-223MR 22 1.20 36 0.32 0.35 0.36 0.30 0.41 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or LPS3010-333MR 33 2.00 27 0.25 0.27 0.28 0.26 0.35 equivalent. LPS3010-473MR 47 3.20 21 0.23 0.24 0.25 0.22 0.31 5. DC current at 25C that causes the specified induc - LPS3010-683MR 68 3.50 21 0.20 0.21 0.22 0.20 0.28 tance drop from its value without current. Click for LPS3010-104MR 100 5.25 14 0.14 0.16 0.17 0.18 0.24 temperature derating information. LPS3010-124MR 120 6.10 12 0.13 0.15 0.15 0.14 0.19 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference LPS3010-154MR 150 9.15 11 0.13 0.14 0.14 0.13 0.17 only and does not represent absolute maximum rat- LPS3010-184MR 180 10.1 9 0.11 0.12 0.13 0.11 0.15 ings. Click for temperature derating information. LPS3010-224MR 220 12.5 8 0.10 0.11 0.12 0.095 0.13 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components Coilcraft Designers Kit C392 contains samples of 0.80 H to 33 H parts (3 each) before soldering. from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 H to 3300 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit 123 123 123 Document 428-2 Shielded SMT Power Inductors LPS3010 Series L vs Frequency L vs Current 1000 1000 330 H 330 H 100 100 68 H 68 H 33 H 33 H 6.8 H 6.8 H 10 10 3.3 H 3.3 H 1 0.68 H 1 0.68 H 0.1 0.1 0.01 0.1 1 10 0.01 0.1 1 10 Frequency (MHz) Current (A) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 428-2 Revised 09/01/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)