Web Sample Tools & Support Document 436-1 page & buy software & FAQ Shielded Power Inductors LPS3015 Very low DCR excellent current handling Miniature 3.0 3.0 mm footprint less than 1.5 mm tall Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 40 45 mg Ambient temperature 40C to +105C with (40C rise) Irms current. Maximum part temperature +145C (ambient + temp rise). Derating. Storage temperature Component: 40C to +145C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3015-333MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3015-102MR 1.0 0.075 190 2.4 2.4 2.5 1.4 2.0 Special order, added cost: LPS3015-152MR 1.5 0.100 140 2.2 2.2 2.3 1.3 1.7 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3015-182MR 1.8 0.100 135 2.1 2.1 2.3 1.1 1.4 or P = non-RoHS tin-lead (63/37). LPS3015-222MR 2.2 0.110 110 2.0 2.1 2.1 1.1 1.4 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts LPS3015-332MR 3.3 0.130 90 1.4 1.5 1.5 1.0 1.4 per full reel). LPS3015-472MR 4.7 0.200 79 1.1 1.2 1.2 0.90 1.2 B = Less than full reel. In tape, but not LPS3015-682MR 6.8 0.300 58 0.83 0.86 0.89 0.68 0.90 machine ready. To have a leader and trailer added ( 25 charge), use code LPS3015-103MR 10 0.440 48 0.60 0.69 0.73 0.55 0.75 letter C instead. LPS3015-153MR 15 0.700 35 0.58 0.61 0.62 0.44 0.59 D = 13 machine-ready reel. EIA-481 LPS3015-183MR 18 0.750 33 0.56 0.58 0.59 0.43 0.58 embossed plastic tape. Factory order LPS3015-223MR 22 0.825 30 0.48 0.49 0.50 0.42 0.57 only, not stocked (3500 per full reel). LPS3015-333MR 33 1.30 23 0.39 0.41 0.42 0.35 0.48 2. Inductance tested at 100 kHz, 0.1 Vrms using an LPS3015-473MR 47 1.55 17 0.36 0.38 0.39 0.30 0.40 Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF 10 MHz. LPS3015-683MR 68 2.35 14 0.29 0.30 0.31 0.25 0.33 3. DCR measured on a micro-ohmmeter. LPS3015-104MR 100 3.40 11 0.24 0.25 0.26 0.19 0.26 4. SRF measured using Agilent/HP 8753ES or equivalent. LPS3015-124MR 120 4.65 9.0 0.21 0.22 0.22 0.17 0.23 5. DC current at 25C that causes the specified induc - LPS3015-154MR 150 6.25 8.0 0.19 0.20 0.20 0.15 0.20 tance drop from its value without current. LPS3015-184MR 180 8.60 7.5 0.16 0.17 0.17 0.13 0.175 Click for temperature derating information. 6. Current that causes the specified temperature rise LPS3015-224MR 220 9.50 6.0 0.15 0.16 0.16 0.11 0.155 from 25C ambient. This information is for reference only and does not represent absolute maximum rat- ings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Coilcraft Designers Kit C392 contains samples of 0.80 H to 33 H parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 H to 3300 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit 123 123 123 Document 436-2 Shielded Power Inductors LPS3015 Series Typical L vs Frequency Typical L vs Current 100 100 33 H 33 H 22 H 22 H 10 H 10 10 10 H 4.7 H 4.7 H 3.3 H 3.3 H 2.2 H 2.2 H 1 1 1.0 H 1.0 H 0.1 0.1 111100 0.010.01 0.10.1 111100 0.010.01 0.10.1 Frequency (MHz) Current (A) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 436-1 Revised 12/20/16 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)