Web Sample Tools & Support Document 436-1 page & buy software & FAQ Shielded Power Inductors LPS3015 Halogen Very low DCR excellent current handling Free Miniature 3.0 3.0 mm footprint less than 1.5 mm tall AEC-Q200 Grade 1 qualified (40C to +125C ambient) Core material Ferrite AEC Core and winding loss See www.coilcraft.com/coreloss + Q200 125C Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 40 45 mg Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 40C to +165C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth Recommended pick and place nozzle OD: 3 mm ID: 1.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 5 6 1. Please specify termination and packaging codes: Isat (A) Irms (A) DCR SRF 2 3 4 Inductance max typ 10% 20% 30% 20C 40C LPS3015-333MRC 1 Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise Termination: R = RoHS compliant matte tin over nickel over silver. LPS3015-102MR 1.0 0.075 190 2.4 2.4 2.5 1.4 2.0 Special order, added cost: LPS3015-152MR 1.5 0.100 140 2.2 2.2 2.3 1.3 1.7 Q = RoHS tin-silver-copper (95.5/4/0.5) LPS3015-182MR 1.8 0.100 135 2.1 2.1 2.3 1.1 1.4 or P = non-RoHS tin-lead (63/37). LPS3015-222MR 2.2 0.110 110 2.0 2.1 2.1 1.1 1.4 Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per LPS3015-332MR 3.3 0.130 90 1.4 1.5 1.5 1.0 1.4 full reel). Quantities less than full reel LPS3015-472MR 4.7 0.200 79 1.1 1.2 1.2 0.90 1.2 available: in tape (not machine ready) LPS3015-682MR 6.8 0.300 58 0.83 0.86 0.89 0.68 0.90 or with leader and trailer ( 25 charge). D = 13 machine-ready reel. EIA-481 LPS3015-103MR 10 0.440 48 0.60 0.69 0.73 0.55 0.75 embossed plastic tape. Factory order LPS3015-153MR 15 0.700 35 0.58 0.61 0.62 0.44 0.59 only, not stocked (3500 per full reel). LPS3015-183MR 18 0.750 33 0.56 0.58 0.59 0.43 0.58 B = Less than full reel. In an effort to LPS3015-223MR 22 0.825 30 0.48 0.49 0.50 0.42 0.57 simplify our part numbering system, Coilcraft is eliminating the need for LPS3015-333MR 33 1.30 23 0.39 0.41 0.42 0.35 0.48 multiple packaging codes. When or- LPS3015-473MR 47 1.55 17 0.36 0.38 0.39 0.30 0.40 dering, simply change the last letter LPS3015-683MR 68 2.35 14 0.29 0.30 0.31 0.25 0.33 of your part number from B to C. LPS3015-104MR 100 3.40 11 0.24 0.25 0.26 0.19 0.26 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for LPS3015-124MR 120 4.65 9.0 0.21 0.22 0.22 0.17 0.23 parts with SRF 10 MHz. LPS3015-154MR 150 6.25 8.0 0.19 0.20 0.20 0.15 0.20 3. DCR measured on a micro-ohmmeter. LPS3015-184MR 180 8.60 7.5 0.16 0.17 0.17 0.13 0.175 4. SRF measured using Agilent/HP 8753ES or equivalent. LPS3015-224MR 220 9.50 6.0 0.15 0.16 0.16 0.11 0.155 5. DC current at 25C that causes the specified induc - tance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum rat- ings. Click for temperature derating information. Coilcraft Designers Kit C392 contains samples of 0.56 H to 33 H parts (3 each) 7. Electrical specifications at 25C. from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to Refer to Doc 362 Soldering Surface Mount Components 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of before soldering. 220 H to 2200 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit 123 123 123 Document 436-2 Shielded Power Inductors LPS3015 Series Typical L vs Frequency Typical L vs Current 100 100 Halogen 33 H 33 H Free 22 H 22 H 10 H 10 10 10 H 4.7 H 4.7 H 3.3 H AEC + 3.3 H Q200 125C 2.2 H 2.2 H 1 1 1.0 H 1.0 H 0.1 0.1 111100 0.010.01 0.10.1 111100 0.010.01 0.10.1 Frequency (MHz) Current (A) Packaging 1000/7 reel 3500/13 reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. NEW OLD 123 123 123 inches Dimensions are in mm Document 436-1 Revised 12/13/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)