Web Sample Tools & Support
Document 436-1
page & buy software & FAQ
Shielded Power Inductors LPS3015
Halogen
Very low DCR; excellent current handling
Free
Miniature 3.0 3.0 mm footprint; less than 1.5 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
Terminations RoHS compliant matte tin over nickel over silver.
+
Q200 105C
Other terminations available at additional cost.
Weight 40 45 mg
Ambient temperature 40C to +105C with (40C rise) Irms current.
Maximum part temperature +145C (ambient + temp rise). Derating.
Storage temperature Component: 40C to +145C.
Tape and reel packaging: 40C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
5 6 1. Please specify termination and packaging codes:
Isat (A) Irms (A)
DCR SRF
2 3 4
Inductance max typ 10% 20% 30% 20C 40C
LPS3015-333MRC
1
Part number 20% (H) (Ohms) (MHz) drop drop drop rise rise
Termination: R = RoHS compliant matte tin over nickel
over silver.
LPS3015-102MR_ 1.0 0.075 190 2.4 2.4 2.5 1.4 2.0
Special order, added cost:
LPS3015-152MR_ 1.5 0.100 140 2.2 2.2 2.3 1.3 1.7
Q = RoHS tin-silver-copper (95.5/4/0.5)
LPS3015-182MR_ 1.8 0.100 135 2.1 2.1 2.3 1.1 1.4
or P = non-RoHS tin-lead (63/37).
LPS3015-222MR_ 2.2 0.110 110 2.0 2.1 2.1 1.1 1.4
Packaging: C = 7 machine-ready reel. EIA-481
embossed plastic tape (1000 parts
LPS3015-332MR_ 3.3 0.130 90 1.4 1.5 1.5 1.0 1.4
per full reel).
LPS3015-472MR_ 4.7 0.200 79 1.1 1.2 1.2 0.90 1.2
B = Less than full reel. In tape, but not
LPS3015-682MR_ 6.8 0.300 58 0.83 0.86 0.89 0.68 0.90
machine ready. To have a leader and
trailer added ($25 charge), use code
LPS3015-103MR_ 10 0.440 48 0.60 0.69 0.73 0.55 0.75
letter C instead.
LPS3015-153MR_ 15 0.700 35 0.58 0.61 0.62 0.44 0.59
D = 13 machine-ready reel. EIA-481
LPS3015-183MR_ 18 0.750 33 0.56 0.58 0.59 0.43 0.58
embossed plastic tape. Factory order
LPS3015-223MR_ 22 0.825 30 0.48 0.49 0.50 0.42 0.57
only, not stocked (3500 per full reel).
LPS3015-333MR_ 33 1.30 23 0.39 0.41 0.42 0.35 0.48
2. Inductance tested at 100 kHz, 0.1 Vrms using an
LPS3015-473MR_ 47 1.55 17 0.36 0.38 0.39 0.30 0.40 Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF 10 MHz.
LPS3015-683MR_ 68 2.35 14 0.29 0.30 0.31 0.25 0.33
3. DCR measured on a micro-ohmmeter.
LPS3015-104MR_ 100 3.40 11 0.24 0.25 0.26 0.19 0.26
4. SRF measured using Agilent/HP 8753ES or equivalent.
LPS3015-124MR_ 120 4.65 9.0 0.21 0.22 0.22 0.17 0.23
5. DC current at 25C that causes the specified induc -
LPS3015-154MR_ 150 6.25 8.0 0.19 0.20 0.20 0.15 0.20
tance drop from its value without current.
LPS3015-184MR_ 180 8.60 7.5 0.16 0.17 0.17 0.13 0.175 Click for temperature derating information.
6. Current that causes the specified temperature rise
LPS3015-224MR_ 220 9.50 6.0 0.15 0.16 0.16 0.11 0.155
from 25C ambient. This information is for reference
only and does not represent absolute maximum rat-
ings. Click for temperature derating information.
7. Electrical specifications at 25C.
Refer to Doc 362 Soldering Surface Mount Components
before soldering.
Coilcraft Designers Kit C392 contains samples of 0.80 H to 33 H parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to
33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 H to 3300 H parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit 123
123
123
Document 436-2
Shielded Power Inductors LPS3015 Series
Typical L vs Frequency Typical L vs Current
100 100
Halogen 33 H
33 H
Free
22 H
22 H
10 H
10 10
10 H
4.7 H
4.7 H
3.3 H
AEC
+ 3.3 H
Q200 105C
2.2 H
2.2 H
1 1
1.0 H
1.0 H
0.1
0.1
111100
0.010.01 0.10.1 111100 0.010.01 0.10.1
Frequency (MHz) Current (A)
Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90 in the
packaging tape compared to previous versions of this product.
NEW OLD
123 123 123
inches
Dimensions are in
mm
Document 436-1 Revised 12/20/16
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Inductance (H)
Inductance (H)