Web Sample Tools & Support
Document 287 -1
page & buy software & FAQ
Shielded Power Inductors MOS6020
6.0 7.1 mm footprint; 2.4 mm high shielded inductors
Custom versions up to 4.7 mH are available.
Designers Kit C359 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.21 g
Ambient temperature 40C to +85C with (40C rise) Irms current.
Maximum part temperature +125C (ambient + temp rise). Derating.
Storage temperature Component: 40C to +125C.
Tape and reel packaging: 40C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500 per 7 reel; 2000 per 13 reel; Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.5 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
2 4 5
2 3
Isat (A) Irms (A)
Inductance DCR max SRF typ
1
Part number 20% (H) (Ohms) (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise
MOS6020-222ML_ 2.2 0.035 110 2.86 3.26 3.56 3.0 4.1
MOS6020-332ML_ 3.3 0.046 85 1.90 2.28 2.46 2.6 3.6
MOS6020-472ML_ 4.7 0.050 60 1.46 1.82 1.94 2.3 3.1
MOS6020-682ML_ 6.8 0.078 55 1.32 1.56 1.72 1.9 2.7
MOS6020-822ML_ 8.2 0.085 45 0.94 1.18 1.30 1.7 2.3
MOS6020-103ML_ 10 0.092 36 0.79 0.95 1.06 1.6 2.2
MOS6020-153ML_ 15 0.130 30 0.83 0.95 1.03 1.3 1.8
MOS6020-223ML_ 22 0.182 22 0.79 0.92 0.97 1.0 1.4
MOS6020-333ML_ 33 0.290 20 0.57 0.67 0.74 0.80 1.1
MOS6020-473ML_ 47 0.420 16 0.45 0.56 0.62 0.50 0.7
MOS6020-683ML_ 68 0.520 15 0.37 0.45 0.51 0.45 0.63
MOS6020-104ML_ 100 0.800 13 0.35 0.40 0.44 0.40 0.56
MOS6020-154ML_ 150 1.28 10 0.26 0.30 0.33 0.35 0.49
MOS6020-224ML_ 220 2.00 8 0.22 0.26 0.28 0.30 0.42
MOS6020-334ML_ 330 2.84 7 0.18 0.22 0.24 0.25 0.35
MOS6020-474ML_ 470 4.40 5 0.15 0.17 0.19 0.22 0.29
1. When ordering, please specify termination and packaging codes: 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/
HP 4263B LCR meter or equivalent.
MOS6020-104MLC
3. SRF measured using Agilent/HP 8753D network analyzer.
Termination: L = RoHS compliant matte tin over nickel over phos bronze. 4. DC current at 25C that causes the specified inductance drop from its
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) value without current. Click for temperature derating information.
or S = non-RoHS tin-lead (63/37).
5. Current that causes the specified temperature rise from 25C ambient.
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic This information is for reference only and does not represent absolute
tape (500 parts per full reel). maximum ratings. Click for temperature derating information.
B = Less than full reel. In tape, but not machine ready. 6. Electrical specifications at 25C.
To have a leader and trailer added ($25 charge), use
Refer to Doc 362 Soldering Surface Mount Components before soldering.
code letter C instead.
D = 13 machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (2000 parts per
full reel).
Document 287-1 Revised 09/02/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.XXX
Document 287-2
Shielded Power Inductors MOS6020
Typical L vs Frequency Typical L vs Current
10000
10000
1000 1000
470 H
470 H
100 H
100
100
100 H
10 H
10 10
10 H
2.2 H
2.2 H
1
1
0.1 0.1
0.01 0.1 1 10 0.1 1 10
Frequency (MHz) Current (A)
0.268 0.095
max max
6,8 2,4
0.24
max
6,0
0.24
max
6,0
0.031
0.169
typ
typ
0,80
4,3
0.225
5,71
0.100
0.063
typ
2,54
1,60
0.055
1,39
Recommended
Land Pattern
inches
Dimensions are in
mm
Document 287-2 Revised 09/02/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2017
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Singapore + 65-6484 8412 sales@coilcraft.com.sg Please check web site for latest information.
Inductance (H)
Inductance (H)