Web Sample Tools & Support Document 775 -1 page & buy software & FAQ Shielded Power Inductors PFL2010 Halogen 2 Only 1 mm high requires a mere 3.2 mm of board space Free Provides the current handling of much larger inductors up to 1800 mA Core material Composite Core and winding loss See www.coilcraft.com/coreloss AEC Environmental RoHS compliant, halogen free + Q200 85C Terminations RoHS compliant matte tin over nickel over silver-plati- num-glass frit. Other terminations available at additional cost. Weight 9.5 9.8 mg Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7 reel 7500/13 reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 5 6 DCR (mOhms) Isat (mA) Irms (mA) 2 4 Inductance SRF typ 1 Part number 20% (H) typ max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise PFL2010-471ME 0.47 60 69 630 1200 1600 1800 1500 1900 PFL2010-681ME 0.68 87 95 560 950 1300 1500 1400 1600 PFL2010-102ME 1.0 189 208 347 850 1100 1200 640 860 PFL2010-222ME 2.2 423 465 129 510 680 790 480 660 PFL2010-472ME 4.7 618 680 66 330 490 570 420 560 1. When ordering, please specify termination and packaging codes: PFL2010-472MEC Termination: E = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. 2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided correla - tion pieces. 3. DCR measured using a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 5. DC current at 25C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 775-1 Revised 09/13/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 775-2 PFL2010 Series Typical L vs Frequency Typical L vs Current 10 10 7 7 Halogen 4.7 H 5 5 Free 4 4 4.7 H 3 3 2.2 H 2 2 2.2 H AEC 1.0 H + Q200 85C 1 1 1.0 H 0.68 H 0.7 0.7 0.68 H 0.47 H 0.5 0.5 0.47 H 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1 0.01 0.1 1 10 110 100 1000 Current (A) Frequency (MHz) 0.087 max 2,20 0.015 0,38 0.039 max 1,00 Terminal wraparound: approx 0.01/0,254 both ends 0.012 0.056 0.012 0,305 1,42 0,305 0.057 0.050 max 1,45 1,27 0.070 1,78 0.070 1.78 0.040 1,02 Recommended Land Pattern inches Dimensions are in mm US +1-847-639-6400 sales coilcraft.com Document 775-2 Revised 09/13815 UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H)