Web Sample Support Document 460-1 page & buy & FAQ For 3 Watt, 7 Watt and 13 Watt Flyback Transformers PoE Applications Flyback transformers for PoE applications Designed to operate in continuous mode at 250 kHz with an input of 36 72 Vdc 1500 Vrms, one minute isolation from primary and bias to second- ary 500 Vrms, 1 minute isolation between all other windings Designers Kit C395 contains two of each part shown in bold Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight POE13P: 6.15 g POE70P: 3.85 g POE30P: 2.05 g Ambient temperature 40C to +85C Max part temperature +125C (ambient + temp rise) Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. Inductance Inductance Leakage 4 6 2 3 DCR max (Ohms) Turns ratio 3 Part Power at 0 A at Ipk inductance Ipk 1 5 7 number (W) 10% (H) min (H) pri bias sec max (H) pri : sec pri : bias (A) Output POE30P-33L 3 310 279.0 1.02 2.01 0.066 4.75 1 : 0.19 1 : 0.70 0.3 3.3 V, 0.91 A POE30P-50L 3 310 279.0 1.02 2.01 0.118 4.50 1 : 0.28 1 : 0.70 0.3 5.0 V, 0.6 A POE30P-12L 3 310 279.0 1.04 2.01 0.700 4.25 1 : 0.70 1 : 0.70 0.3 12 V, 0.25 A POE70P-33L 7 155 139.5 0.414 0.822 0.036 4.00 1 : 0.19 1 : 0.667 0.65 3.3 V, 2.12 A POE70P-50L 7 155 139.5 0.414 0.822 0.060 3.60 1 : 0.262 1 : 0.667 0.65 5.0 V, 1.4 A POE70P-12L 7 155 139.5 0.414 0.822 0.343 3.25 1 : 0.667 1 : 0.667 0.65 12 V, 0.6 A POE13P-33L 13 127 114.3 0.255 0.310 0.024 1.25 1 : 0.166 1 : 0.50 1.0 3.3 V, 4.0 A POE13P-50L 13 127 114.3 0.222 0.348 0.039 0.950 1 : 0.25 1 : 0.50 1.0 5.0 V, 2.6 A POE13P-12L 13 127 114.3 0.199 0.308 0.065 0.650 1 : 0.50 1 : 0.50 1.0 12 V, 1.08 A POE13P-19L 13 127 114.3 0.290 0.355 0.066 0.800 1 : 0.567 1 : 0.50 1.0 19.5 V, 0.67 A POE13P-24L 13 127 114.3 0.255 0.315 0.067 0.600 1 : 0.667 1 : 0.50 1.0 24 V, 0.54 A 1. When ordering, please specify packaging code: Schematics POE30P-12LD Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic POE13P POE70P, POE30P tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 8 6 charge). 3 7 3 5 B = Less than full reel. In an effort to simplify our part Pri Sec Pri Sec numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D. 4 9 4 7 10 8 2. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms, 0 Adc. 2 2 3. Ipk is peak primary current drawn at minimum input voltage. 4. DCR for the secondary is per winding. Bias Bias 5. Leakage inductance measured between pins 3 and 4 with all other pins shorted. 1 1 6. Turns ratio is with the secondary windings connected in parallel. 7. Output of the secondary is with the windings connected in parallel. Bias Secondary windings to be con- Secondary windings to be con- winding output is 12 V, 20 mA. nected in parallel on PC board nected in parallel on PC board 8. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 460-1 Revised 11/04/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2020 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.POE70P-XXL POE13P-XXL POE30P-XXL XXXX Y XXXX Y XXXX Y Document 460-2 Flyback Transformers for PoE Internal Part POE13P code number Packaging 175 per 13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 0.500 28 mm pocket spacing, 12.93 mm pocket depth max 12,70 Parts manufactured prior to 0.004/0,10 0.039 April, 2012 may be marked Dot indicates pin1 1,00 differently. 0.699 max 17,75 0.050 0.512 1,27 0.080 0.590 13,00 0.028 2,03 14,99 0,70 1 10 0.530 max 13,46 1 5 0.098 6 2,50 Recommended 0.098 2,50 LandPattern Internal Part POE70P code number Packaging 200 per 13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 0.433 24 mm pocket spacing, 11.2 mm pocket depth max 11,00 0.004/0,10 0.041 Dot indicates pin1 1,05 0.600 max 15,24 0.413 0.050 0.024 0.080 0.460 1,27 10,50 0,60 2,03 11,68 8 1 0.50 max 12,7 1 4 5 0.098 Recommended 0.098 2,50 2,50 LandPattern Internal Part POE30P code number Packaging 350 per 13 reel Plastic tape: 32 mm wide, 0.45 mm thick, 20 mm 0.355 max 9,02 pocket spacing, 9.35 mm pocket depth 0.041 0.004/0,10 1,05 0.520 Dot indicates pin1 max 13,21 0.050 0.028 0.339 1,27 0,70 8,60 0.080 0.370 8 2,03 9,40 1 0.430 max 10,92 1 4 5 0.098 0.098 Recommended inches 2,50 Dimensions are in 2,50 LandPattern mm Document 460-2 Revised 11/04/20 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2020 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.