Document 1103-1 SMT Current Sense Transformer SCS Series Sensed current up to 30 A Designed for up to 1 MHz and above 500 Vrms, one minute isolation (hipot) between windings. Core material Ferrite Terminations RoHS compliant matte tin over nickel over phos bronze Weight 3.4 3.7 g Ambient temperature 40C to +125C Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 200/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 3.0 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787 PCB Washing.pdf 3 DCR max Frequency Volt-time Sensed Terminating (Ohms) 2 4 5 6 7 Turns (N) Inductance range product current I resistance R in T 1 Part number pri : sec min (mH) pri sec (kHz) (Vsec) max (A) (Ohms) SCS-050L 1 : 50 3.8 0.0024 0.90 6 >1000 80 30 1.7 SCS-100L 1 : 100 14.8 0.0024 1.80 3 >1000 160 30 3.3 SCS-200L 1 : 200 59.2 0.0024 3.90 2 >1000 320 30 6.7 1. When ordering, please specify packaging code: Typical Circuit SCS-200LD Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D. 2. Inductance measured between secondary pins at 10 kHz, 0.06 Vrms, 0 Adc. 3. Primary DCR is measured with the windings connected in parallel. 4. For specific questions regarding frequency range, please contact us at cst coilcraft.com. 5. Maximum volt-time product is for the secondary, based on 2000 Gauss. 6. Primary current of 30 A causes less than 25C temperature rise from 25C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve). 7. Terminating resistance (R ) value is based on 1 Volt output with 30 Amps T flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: R = V N / I T out sec in. 8. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Specifications subject to change without notice. Document 1103-1 Revised 06/15/21 US +1-847-639-6400 sales coilcraft.com Please check our website for latest information. UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 1103-2 SCS Series Current Sense Transformers Temperature Rise vs Current Dimensions inches Dimensions are in mm Document 1103-2 Revised 06/15/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.