SER1412-301MEB Coilcraft

Web Sample Tools & Support Document 609-1 page & buy software & FAQ Shielded Power Inductors SER1400 Designed for high current power supply applications Flat wire windings provide exceptionally low DCR Specially formed terminations provide small footprint Isat ratings as high as 105.9 A Designers Kit C427 contains 3 each of all values Core material Ferrite SER1412 only Core and winding loss See www.coilcraft.com/coreloss Environment RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 40C to +165C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. High Isat for high peak current applications 5 6 Isat (A) Irms (A) SRF 2 3 3 4 Inductance DCR typ DCR max typ 10% 20% 30% 20C 40C Height max 1 Part number 20% (H) (mOhms) (mOhms) (MHz) drop drop drop rise rise (inches / mm) SER1412-301ME 0.30 1.30 1.43 154 87.0 92.8 105.9 30 37 0.498 / 12,66 SER1412-501ME 0.50 1.30 1.43 122 56.1 59.3 62.5 30 37 0.498 / 12,66 SER1412-681ME 0.68 1.30 1.43 100 41.2 43.5 45.8 30 37 0.498 / 12,66 SER1412-102ME 1.0 1.30 1.43 78 28.9 31.0 32.2 30 37 0.498 / 12,66 SER1412-152ME 1.5 1.30 1.43 62 21.8 23.6 24.6 30 37 0.498 / 12,66 SER1412-202ME 2.0 1.30 1.43 50 16.9 18.5 19.4 30 37 0.498 / 12,66 SER1412-362ME 3.6 1.30 1.43 35 9.6 11.2 12.1 30 37 0.498 / 12,66 Low DCR for high average current applications 5 6 Isat (A) Irms (A) DCR DCR SRF 2 3 3 4 Inductance typ max typ 10% 20% 30% 20C 40C Height max 1 Part number 20% (H) (mOhms) (mOhms) (MHz) drop drop drop rise rise (inches / mm) SER1408-301ME 0.30 0.48 0.55 140 43.2 49.6 53.0 38 42 0.325 / 8,26 SER1408-501ME 0.50 0.48 0.55 83 25.8 29.6 31.4 38 42 0.325 / 8,26 SER1408-681ME 0.68 0.48 0.55 63 18.8 21.6 23.2 38 42 0.325 / 8,26 SER1408-102ME 1.0 0.48 0.55 48 12.1 14.2 16.1 38 42 0.325 / 8,26 SER1410-152ME 1.5 0.90 0.99 53 16.8 18.9 20.3 33 39 0.416 / 10,56 SER1410-202ME 2.0 0.90 0.99 45 12.1 13.9 15.0 33 39 0.416 / 10,56 1. When ordering, please specify termination and packaging codes: 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent. SER1410-202MED 3. DCR measured on a Keithley 580 micro-ohmmeter or equivalent. Termination: E = RoHS compliant tin-silver over copper. 4. SRF measured using an Agilent/HP 4395A network analyzer and an Special order: T = RoHS tin-silver-copper Agilent/HP 16193A test fixture. (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). 5. Typical dc current at 25C that causes the specified inductance drop Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic from its value without current. Click for temperature derating information. tape. 6. Typical current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent B = Less than full reel. In tape, but not machine ready. absolute maximum ratings. Click for temperature derating information. To have a leader and trailer added ( 25 charge), use code letter D instead. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. US +1-847-639-6400 sales coilcraft.com Document 609-1 Revised 10/13/16 UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 609-2 Shielded Power Inductors SER1400 Series 0.348 Part number 8,83 SER14XX-XXX 0.271 0.01 C L 0.355 6,88 0,256 XXXXY 0.221 9,02 5,60 0.130 Internal code 3,30 Recommended Land Pattern SER1412 only 0.60 0.473 max max 15,24 12,00 Height (see table) 0.004/0,102 0.100 0.397 max 2,54 10,09 0.218 min 5,53 inches Dimensions are in mm Height max Series (inches/ mm) Weight SER1408 0.325 / 8,26 3.5 3.8 g SER1410 0.416 / 10,56 4.8 5.2 g SER1412 0.498 / 12,66 6.1 6.7 g Packaging SER1408 300/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 8.6 mm pocket depth SER1410 250/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 10.8 mm pocket depth SER1412 250/13 reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 12.8 mm pocket depth US +1-847-639-6400 sales coilcraft.com Document 609-2 Revised 10/13/16 UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.