Web Sample Tools & Support Document 349-1 page & buy software & FAQ Shielded Power Inductor SER2000 Designed for high current power supply applications AEC + Q200 85C Flat wire windings provide exceptionally low DCR Isat ratings as high as 100 A Designers Kit C374 contains 2 each of nine parts. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver-copper over copper. Other terminations available at additional cost. Ambient temperature 40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: 40C to +125C. Tape and reel packaging: 40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 0.48 per billion hours / 2.083E+09 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 1 2 3 Caution: Terminal 3 is provided for mounting stability only. This terminal is connected to the winding of the inductor and must not be connected to ground or any circuitry. Packaging SER2009 200 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 9.25 pocket depth SER2010 200 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 10.5 pocket depth SER2011 170 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.6 pocket depth SER2012 150 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 13.0 pocket depth SER2013 150 per 13 reel Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 14.0 pocket depth SER2014 125 per 13 reel Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 15.0 pocket depth Document 349-1 Revised 03/04/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 349-2 Shielded Power Inductors SER2000 Series 6 Irms (A) 1. Please specify termination and packaging codes: Inductance DCR DCRSRF 2 3 3 4 5 20% typ max typ Isat 20C 40C Height 1 SER2013-472MLD Part number (H) (m) (m) (MHz) (A) rise rise (mm) Termination: L = RoHS compliant tin-silver-copper SER2009-301ML 0.30 0.630 0.740 550 100 41 54 8,64 over copper. AEC SER2010-301ML 0.30 0.900 1.00 182 100 36 45 9,40 Special order: + Q200 85C S = non-RoHS tin-lead (63/37). SER2009-501ML 0.50 0.630 0.740 544 60 41 54 8,64 Packaging: D = 13 machine-ready reel. EIA-481 SER2010-501ML 0.50 0.900 1.00 148 81 36 45 9,40 embossed plastic tape. Quantities SER2011-501ML 0.50 1.20 1.34 161 100 30 40 10,67 less than full reel available: in tape (not machine ready) or with leader SER2009-601ML 0.60 0.630 0.740 648 49 41 54 8,64 and trailer ( 25 charge). SER2010-601ML 0.60 0.900 1.00 115 70 36 45 9,40 B = Less than full reel. In an effort to simplify our part numbering system, SER2011-601ML 0.60 1.20 1.34 124 90 30 40 10,67 Coilcraft is eliminating the need for SER2012-601ML 0.60 1.44 1.60 115 97 25 35 11,94 multiple packaging codes. When ordering, simply change the last letter SER2009-681ML 0.68 0.630 0.740 454 45 41 54 8,64 of your part number from B to D. SER2010-681ML 0.68 0.900 1.00 136 62 36 45 9,40 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on SER2011-681ML 0.68 1.20 1.34 135 78 30 40 10,67 an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a Keithley 580 micro-ohmmeter. SER2012-681ML 0.68 1.44 1.60 103 85 25 35 11,94 4. SRF measured using an Agilent/HP 4395A network SER2013-681ML 0.68 1.70 1.82 104 98 23 30 12,95 analyzer and an Agilent/HP 16092A test fixture. SER2009-801ML 0.80 0.630 0.740 567 38 41 54 8,64 5. DC current at 25C that causes a 10% (typ) inductance drop from its value without current. SER2010-801ML 0.80 0.900 1.00 92 53 36 45 9,40 Click for temperature derating information. SER2011-801ML 0.80 1.20 1.34 113 70 30 40 10,67 6. Current that causes the specified temperature rise from SER2012-801ML 0.80 1.44 1.60 91 75 25 35 11,94 25C ambient. This information is for reference only and does not represent absolute maximum ratings. SER2013-801ML 0.80 1.70 1.82 93 85 23 30 12,95 Click for temperature derating information. When Irms is SER2014-801ML 0.80 1.94 2.15 104 98 21 27 13,97 greater than Isat, Isat is the more critical specification, and Irms is shown in gray type. See Temperature Rise SER2009-901ML 0.90 0.630 0.740 557 33 41 54 8,64 vs Current curve below. SER2010-901ML 0.90 0.900 1.00 96 48 36 45 9,40 7. Electrical specifications at 25C. SER2011-901ML 0.90 1.20 1.34 104 62 30 40 10,67 Refer to Doc 362 Soldering Surface Mount Components SER2012-901ML 0.90 1.44 1.60 85 69 25 35 11,94 before soldering. SER2013-901ML 0.90 1.70 1.82 98 73 23 30 12,95 SER2014-901ML 0.90 1.94 2.15 102 87 21 27 13,97 SER2009-102ML 1.0 0.630 0.740 488 29 41 54 8,64 Temperature Rise vs Current SER2010-102ML 1.0 0.900 1.00 81 42 36 45 9,40 SER2011-102ML 1.0 1.20 1.34 97 56 30 40 10,67 70 SER2012-102ML 1.0 1.44 1.60 75 64 25 35 11,94 60 SER2013-102ML 1.0 1.70 1.82 98 68 23 30 12,95 SER2014-102ML 1.0 1.94 2.15 88 70 21 27 2713,97 50 SER2009-122ML 1.2 0.630 0.740 81 28 41 54 8,64 40 SER2010-122ML 1.2 0.900 1.00 69 37 36 45 9,40 SER2011-122ML 1.2 1.20 1.34 81 49 30 40 10,67 30 SER2012-122ML 1.2 1.44 1.60 73 54 25 35 11,94 SER2013-122ML 1.2 1.70 1.82 82 58 23 30 12,95 20 SER2014-122ML 1.2 1.94 2.15 78 63 21 27 13,97 10 SER2009-202ML 2.0 0.630 0.740 40 16 41 54 8,64 0 SER2010-202ML 2.0 0.900 1.00 48 27 36 45 9,40 0310 20 040 50 60 70 SER2011-202ML 2.0 1.20 1.34 56 37 30 40 10,67 Current (Arms) SER2012-202ML 2.0 1.44 1.60 51 35 25 35 11,94 SER2013-202ML 2.0 1.70 1.82 61 40 23 30 12,95 SER2014-202ML 2.0 1.94 2.15 62 45 21 27 13,97 SER2013-362ML 3.6 1.70 1.82 38 25 23 30 12,95 SER2013-402ML 4.0 1.70 1.82 35 20 23 30 12,95 SER2014-402ML 4.0 1.94 2.15 36 25 21 27 13,97 SER2013-472ML 4.7 1.70 1.82 30 18 23 30 12,95 Parts shown in bold are included in Coilcraft Designers Kit C374. Document 349-2 Revised 03/04/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. SER2010 SER2009 SER2011 SER2012 SER2013 R2014 SE Temperature rise (from 25C)