Web Sample Tools & Support Document 962-1 page & buy software & FAQ Shielded Power Inductors XAL1030 Halogen Very high current and low DCR Free Low profile, only 3 mm high Soft saturation makes them ideal for VRM/VRD applications. Core material Composite Environmental RoHS compliant, halogen free AEC + Terminations RoHS compliant tin-silver over copper. Other Q200 125C terminations available at additional cost. Weight 1.6 1.8 g Operating voltage: 0 55 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250/7 reel 1000/13 reel Plastic tape: 24 mm wide, 0.3 mm thick, 16 mm pocket spacing, 3.25 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 6 2 4 DCR (mOhms) Irms (A) Inductance SRF typ Isat 1 5 Part number 20% (H) typ max (MHz) (A) 20C rise 40C rise Irms Testing XAL1030-161ME 0.16 1.10 1.21 120 88.0 28.0 42.0 Irms testing was performed on XAL1030-301ME 0.30 1.55 1.70 78 68.0 25.5 35.0 0.75 inch wide 0.25 inch thick XAL1030-561ME 0.56 2.50 2.75 53 44.0 23.0 32.0 copper traces in still air. XAL1030-102ME 1.0 4.50 4.95 41 35.0 16.0 23.0 Temperature rise is highly dependent on many factors 1. When ordering, please specify termination and packaging coded: including pcb land pattern, trace size, and proximity to other com- XAL1030-102MEC ponents. Therefore temperature Termination: E = RoHS compliant tin-silver over copper. rise should be verified in appli - Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). cation conditions. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ( 25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Factory order only, not stocked. 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. These parts are preproduction products for electrical evaluation only. Document 962-1 Revised 11/02/18 US +1-847-639-6400 sales coilcraft.com Specification subject to change without notice. UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sgXXX Document 962-2 Shielded Power Inductors XAL1030 L vs Current L vs Frequency 10 0.24 0.20 Halogen 0.16 0.16 H Free 0.12 0.08 0.04 0 1.0 H AEC 0102030540 060708090 100 1 + Q200 125C Current (A) 0.56 H 0.5 0.4 0.30 H 0.3 0.30 H 0.16 H 0.2 0.1 0.1 0.1 1 10 100 0 0102030540 06070 80 Frequency (MHz) Current (A) 0.8 0.394 0.020 0.7 10,0 0,50 0.6 0.5 0.56 H 0.4 0.3 0.445 0.020 0.2 11,3 0,50 0.1 0 0152015 0253035404550 Current (A) 1.6 Dash number Indicates start lead and orientation 1.2 of terminations 0.8 0.122 1.0 H max * 3,1 0.4 0.0870.004 0.315 See typ 2,20 0,10 8,0 table 0 0.175 0.010 04 81216220 24 8 32 36 40 4,45 0,25 Terminal Current (A) Dash thickness typ number (in / mm) 0.262 -181 0.0157 / 0.40 6,65 -301 0.0157 / 0.40 -561 0.0118 / 0.30 -102 0.0079 / 0.20 0.354 * For optional tin-lead and tin-silver- copper terminations, dimensions are 9,0 for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0.13 mm. 0.094 2,38 Recommended inches Dimensions are in Land Pattern mm Document 962-2 Revised 11/02/18 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales coilcraft.com.sg Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)