XAL4020-222MEC Coilcraft

Web Sample Tools & Support Document 806-1 page & buy software & FAQ Shielded Power Inductors XAL40xx Halogen High current and very low DCR Free AEC-Q200 Grade 1 (40C to +125C) Soft saturation makes them ideal for VRM/VRD applications. AEC + Designers Kit C429 contains 5 of each value Q200 125C Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Operating voltage: 0 60 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 6 2 DCR (mOhms) 4 5 Irms (A) Inductance SRF typ Isat 1 Part number 20% (H) typ max (MHz) (A) 20C rise 40C rise Irms Testing XAL4020-221ME 0.22 5.81 6.40 191 18.7 12.0 16.8 Irms testing was performed on XAL4020-401ME 0.40 7.55 8.30 145 12.5 10.0 14.0 0.75 inch wide 0.25 inch thick XAL4020-601ME 0.60 9.50 10.45 106 10.4 7.9 11.7 copper traces in still air. XAL4020-102ME 1.0 13.25 14.60 79 8.7 6.7 9.6 Temperature rise is highly XAL4020-122ME 1.2 17.75 19.50 69 7.9 6.6 9.0 dependent on many factors XAL4020-152ME 1.5 21.45 23.60 64 7.1 5.2 7.5 including pcb land pattern, XAL4020-222ME 2.2 35.20 38.70 52 5.6 4.0 5.5 trace size, and proximity to XAL4030-332ME 3.3 26.0 28.6 43 5.9 5.0 6.6 other components. Therefore XAL4030-472ME 4.7 40.1 44.1 36 4.6 3.9 5.1 temperature rise should be verified in application conditions. XAL4030-682ME 6.8 67.4 74.1 29 3.6 3.0 3.9 XAL4040-822ME 8.2 60.8 66.9 27 4.0 2.4 3.4 XAL4040-103ME 10 84.0 92.4 24 3.0 2.2 3.1 XAL4040-153ME 15 109 120 20 2.9 2.0 2.8 1. When ordering, please specify termination and packaging codes: XAL4040-153MEC Termination: E = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked. 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Specifications subject to change without notice. Document 806-1 Revised 06/22/21 US +1-847-639-6400 sales coilcraft.com Please check our website for latest information. UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 806-2 Shielded Power InductorsShielded Power Inductors XAL40XAL40xxxx L vs Current 2.0 0.4 1.6 0.3 Halogen 1.2 Free 0.22 H 1.5 H 0.2 0.8 0.1 0.4 0 0 AEC 0 24 618 01214161820 0 1 2 3 4 5 6 7 8 + Q200 125C Current (A) Current (A) 0.6 4.0 3.5 0.5 3.0 0.4 2.5 0.40 H 2.2 H 2.0 0.3 1.5 0.2 1.0 0.1 0.5 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Current (A) Current (A) 1.0 5 0.8 4 3.3 H 0.6 3 0.60 H 0.4 2 0.2 1 0 0 0 1 2345 6 78 9101112 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Current (A) Current (A) 1.6 6 1.4 5 1.2 4 1.0 4.7 H 1.0 H 0.8 3 0.6 2 0.4 1 0.2 0 0 0 1 2 3 4567 8 910 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Current (A) Current (A) 1.6 10 1.4 8 1.2 1.0 6 1.2 H 6.8 H 0.8 4 0.6 0.4 2 0.2 0 0 0 1 2 3 4567 8 910 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Current (A) Current (A) Document 806-2 Revised 06/22/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)