Web Sample Tools & Support Document 863-1 page & buy software & FAQ Shielded Power Inductors XAL7030 Halogen High current and very low DCR Free AEC-200 Grade 1 (40C to +125C) Soft saturation makes them ideal for VRM/VRD applications. Designers Kit C441 contains 3 each of all values Core material Composite AEC + Q200 125C Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Weight 0.83 0.86 g Operating voltage: 0 60 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 400/7 reel 1500/13 reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 6 2 DCR (mOhms) 4 5 Irms (A) Inductance SRF typ Isat 1 Part number 20% (H) typ max (MHz) (A) 20C rise 40C rise Irms Testing XAL7030-161ME 0.16 1.15 1.26 158 60.0 24.9 32.5 Irms testing was performed on XAL7030-301ME 0.30 1.75 1.92 101 41.0 21.0 27.6 0.75 inch wide 0.25 inch thick XAL7030-601ME 0.60 3.00 3.30 72 36.0 18.0 23.0 copper traces in still air. XAL7030-102ME 1.0 4.55 5.00 52 28.0 16.1 21.8 Temperature rise is highly XAL7030-152ME 1.5 7.60 8.36 39 23.5 11.9 15.0 dependent on many factors XAL7030-222ME 2.2 13.7 15.07 29 18.0 10.0 12.9 including pcb land pattern, XAL7030-272ME 2.7 15.7 17.30 32 12.8 9.2 11.4 trace size, and proximity to XAL7030-332ME 3.3 19.5 21.45 25 12.3 8.0 10.0 other components. Therefore XAL7030-472ME 4.7 26.1 30.00 21 10.1 6.9 9.0 temperature rise should be XAL7030-562ME 5.6 28.1 32.32 17 9.8 5.3 7.3 verified in application conditions. XAL7030-682ME 6.8 45.0 51.75 15 8.7 4.4 6.8 XAL7030-822ME 8.2 53.0 60.94 13 8.4 2.9 5.9 XAL7030-103ME 10 60.4 69.46 12 7.7 2.6 5.3 1. When ordering, please specify termination and packaging code: 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. XAL7030-103MEC 4. SRF measured using Agilent/HP 4395A or equivalent. Termination: E = Halogen free component. RoHS compliant tin-silver 5. DC current at 25C that causes an inductance drop of 30% (typ) from over copper terminations. its value without current. Special order: T = RoHS tin-silver-copper Click for temperature derating information. (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). 6. Current that causes the specified temperature rise from 25C ambient. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic This information is for reference only and does not represent absolute tape (400 parts per full reel). Quantities less than maximum ratings. Click for temperature derating information. full reel available: in tape (not machine ready) or 7. Electrical specifications at 25C. with leader and trailer ( 25 charge). Refer to Doc 362 Soldering Surface Mount Components before soldering. B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). Document 863-1 Revised 06/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.XXX Document 863-2 Shielded Power Inductors XAL7030 0.295 0.020 Typical L vs Frequency 7,5 0,5 100 Halogen 0.295 0.020 10 H Free 7,5 0,5 8.2 H 6.8 H 5.6 H 4.7 H 10 3.3 H 2.7 H Dash 2.2 H Indicates direction of terminals and AEC number start (short) lead. Connect high dv/dt + 1.5 H Q200 125C here forlowest EMI. 1.0 H 0.60 H 1 0.122 max 3,1 0.30 H 0.236 See table typ 6,0 0.16 H 0.123 0.010 3,12 0,25 0.1 0.1 1 10 100 0.116 Frequency (MHz) 2,94 0.256 6,50 See table Recommended inches Dimensions are in Land Pattern mm Terminal width Land pattern Dash 0.004 / 0,10 width number (in / mm) (in / mm) -161 0.063 / 1,60 0.070 / 1.78 -301 0.063 / 1,60 0.070 / 1.78 -601 0.063 / 1,60 0.070 / 1.78 -102 0.063 / 1,60 0.070 / 1.78 -152 0.063 / 1,60 0.070 / 1.78 -222 0.063 / 1,60 0.070 / 1.78 -272 0.063 / 1,60 0.070 / 1.78 -332 0.063 / 1,60 0.070 / 1.78 -472 0.055 / 1,40 0.062 / 1.58 -562 0.055 / 1,40 0.062 / 1.58 -682 0.055 / 1,40 0.062 / 1.58 -822 0.055 / 1,40 0.062 / 1.58 -103 0.055 / 1,40 0.062 / 1.58 Document 863-2 Revised 06/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. HIGH TEMPERATURE Inductance (H)