XFL3010-103MEB Coilcraft

Document 727-1 Shielded Power Inductors XFL3010 Halogen AEC-Q200 Grade 1 (40C to +125C) Free High current, magnetically shielded power inductors Only 1 mm high with a 3 mm 3 mm footprint Designers Kit C440 contains 5 of each XFL3010 and XFL3012 value Core material Composite AEC + Q200 125C Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight 44 mg Operating voltage 0 40 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 2000/7reel 7500/13 reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. Typical L vs Frequency 1000 220 H 100 H 100 33 H 10 H 10 3.3 H 1.0 H 1 0.1 0.1 1 10 100 Frequency (MHz) Document 727-1 Revised 09/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H)Document 727-2 Shielded Power Inductors Shielded Power Inductors XFL3010 XFL3010 3 5 6 2 DCR (Ohms) 4 Isat (A) Irms (A) Inductance SRF typ 1 Part number 20% (H) nom max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise XFL3010-601ME 0.60 0.030 0.033 180 1.8 2.4 2.7 1.8 2.5 XFL3010-102ME 1.0 0.043 0.049 128 1.5 2.1 2.4 1.6 2.3 XFL3010-152ME 1.5 0.071 0.080 97.0 1.2 1.6 1.9 1.4 1.9 Halogen XFL3010-222ME 2.2 0.111 0.122 78.0 0.94 1.2 1.5 1.0 1.3 Free XFL3010-332ME 3.3 0.154 0.166 64.0 0.86 1.1 1.3 0.88 1.2 XFL3010-472ME 4.7 0.217 0.230 57.0 0.71 0.97 1.1 0.84 1.1 XFL3010-682ME 6.8 0.315 0.346 42.0 0.56 0.78 0.92 0.72 0.95 XFL3010-103ME 10 0.472 0.519 35.0 0.44 0.61 0.71 0.62 0.82 AEC XFL3010-153ME 15 0.521 0.560 28.4 0.33 0.45 0.53 0.56 0.76 + Q200 125C XFL3010-223ME 22 0.770 0.818 21.7 0.26 0.35 0.40 0.48 0.66 XFL3010-333ME 33 1.12 1.20 17.5 0.22 0.30 0.35 0.41 0.56 XFL3010-393ME 39 1.23 1.40 16.9 0.21 0.29 0.33 0.37 0.51 XFL3010-473ME 47 1.71 1.93 14.4 0.16 0.23 0.27 0.33 0.44 XFL3010-563ME 56 1.95 2.16 13.6 0.16 0.22 0.25 0.3 0.41 XFL3010-683ME 68 2.32 2.60 12.7 0.15 0.21 0.24 0.27 0.36 XFL3010-823ME 82 2.77 3.10 11.6 0.14 0.20 0.23 0.26 0.34 XFL3010-104ME 100 4.64 5.50 10.1 0.13 0.19 0.22 0.20 0.29 XFL3010-224ME 220 9.91 12.0 6.9 0.08 0.12 0.14 0.14 0.19 1. When ordering, please specify termination and packaging codes: XFL3010-224MEC Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Special order: S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 727-2 Revised 09/23/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.