Document 727-1
Shielded Power Inductors XFL3010
Halogen
AEC-Q200 Grade 1 qualified (40C to +125C ambient)
Free
High current, magnetically shielded power inductors
Only 1 mm high with a 3 mm 3 mm footprint
Designers Kit C440 contains 5 of each XFL3010 and XFL3012 value
Core material Composite
AEC
Environmental RoHS compliant, halogen free
+
Q200 125C
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Weight 44 mg
Ambient temperature 40C to +125C with (40C rise) Irms current.
Maximum part temperature +165C (ambient + temp rise). Derating.
Storage temperature Component: 55C to +165C.
Tape and reel packaging: 55C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7reel; 7500/13 reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
3 5 5
2 DCR (Ohms) 4 Isat (A) Irms (A)
Inductance SRF typ
1
Part number 20% (H) nom max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise
XFL3010-601ME_ 0.60 0.030 0.033 180 1.8 2.4 2.7 1.8 2.5
XFL3010-102ME_ 1.0 0.043 0.049 128 1.5 2.1 2.4 1.6 2.3
XFL3010-152ME_ 1.5 0.071 0.080 97.0 1.2 1.6 1.9 1.4 1.9
XFL3010-222ME_ 2.2 0.111 0.122 78.0 0.94 1.2 1.5 1.0 1.3
XFL3010-332ME_ 3.3 0.154 0.166 64.0 0.86 1.1 1.3 0.88 1.2
XFL3010-472ME_ 4.7 0.217 0.230 57.0 0.71 0.97 1.1 0.84 1.1
XFL3010-682ME_ 6.8 0.315 0.346 42.0 0.56 0.78 0.92 0.72 0.95
XFL3010-103ME_ 10 0.472 0.519 35.0 0.44 0.61 0.71 0.62 0.82
XFL3010-153ME_ 15 0.521 0.560 28.4 0.33 0.45 0.53 0.56 0.76
XFL3010-223ME_ 22 0.770 0.818 21.7 0.26 0.35 0.40 0.48 0.66
XFL3010-333ME_ 33 1.12 1.20 17.5 0.22 0.30 0.35 0.41 0.56
XFL3010-393ME_ 39 1.23 1.40 16.9 0.21 0.29 0.33 0.37 0.51
XFL3010-473ME_ 47 1.71 1.93 14.4 0.16 0.23 0.27 0.33 0.44
XFL3010-563ME_ 56 1.95 2.16 13.6 0.16 0.22 0.25 0.3 0.41
XFL3010-683ME_ 68 2.32 2.60 12.7 0.15 0.21 0.24 0.27 0.36
XFL3010-823ME_ 82 2.77 3.10 11.6 0.14 0.20 0.23 0.26 0.34
XFL3010-104ME_ 100 4.64 5.50 10.1 0.13 0.19 0.22 0.20 0.29
XFL3010-224ME_ 220 9.91 12.0 6.9 0.08 0.12 0.14 0.14 0.19
1. When ordering, please specify termination and packaging codes:
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
XFL3010-222MEC
4. SRF measured using Agilent/HP 4395A or equivalent.
Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over
5. DC current at 25C that causes the specified inductance drop from its
tin over nickel over silver-platinum.
value without current. Click for temperature derating information.
Special order:
6. Current that causes the specified temperature rise from 25C ambient.
S = non-RoHS tin-lead (63/37).
This information is for reference only and does not represent absolute
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
maximum ratings. Click for temperature derating information.
tape (2000 parts per full reel).
7. Electrical specifications at 25C.
B = Less than full reel. In tape, but not machine ready.
Refer to Doc 362 Soldering Surface Mount Components before soldering.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13 machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
Document 727-1 Revised 11/26/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sgXXX
Document 727-2
Shielded Power Inductors Shielded Power Inductors XFL3010 XFL3010
Dash Dot indicates
Typical L vs Frequency
number start lead
1000
Parts manufactured prior
to June 2018 maybe
220 H
0.118 0.008
Halogen
marked differently.
3,0 0,2
Free
100 H
100
33 H
0.118 0.008
3,0 0,2
10 H
AEC
10
+
Q200 125C
3.3 H
0.043
max*
1,1
0.080
1.0 H
2,03
1
0.106 0.008 0.114
0.1 2,69 0,20 2,90
0.1 1 10 100
Frequency (MHz)
0.030 0.008
0.039
0,77 0,20
1,0
0.050
Recommended
typ
1,26
Land Pattern
* For optional tin-lead and tin-silver-
copper terminations, dimensions
inches
are for the mounted part.
Dimensions are in
mm
Dimensions before mounting can be
an additional 0.005 inch / 0.13 mm.
Document 727-2 Revised 11/26/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Inductance (H)