Web Sample Tools & Support Document 769-1 page & buy software & FAQ Shielded Power Inductors XFL4015 Halogen Very low profile, only 1.5 mm high Free Extremely low DCR, excellent current handling, soft saturation AEC-Q200 Grade 1 (40C to +125C) Designers Kit C455 contains 5 of each XFL4012 and XFL4015 value. AEC Core material Composite + Q200 125C Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 0.128 - 0.136 g Operating voltage 0 20 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 1000/7reel 4000/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.78 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787 PCB Washing.pdf. 3 5 6 2 DCR (mOhms) 4 Isat (A) Irms (A) Inductance SRF typ 1 Part number 20% (H) typ max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise XFL4015-181ME 0.18 4.20 4.70 150 6.2 8.0 8.5 12.0 14.5 XFL4015-331ME 0.33 6.80 7.50 112 5.5 7.0 7.5 9.6 13.2 XFL4015-471ME 0.47 7.60 8.36 89 3.5 5.4 6.6 9.1 11.2 XFL4015-701ME 0.70 9.50 10.45 70 3.3 5.3 6.3 7.2 10.1 XFL4015-122ME 1.2 18.8 20.7 61 2.6 3.7 4.5 5.1 7.1 1. When ordering, please specify termination and packaging codes: Irms Testing XFL4015-122MEC Irms testing was performed on Termination: E = RoHS compliant tin-silver over copper. 0.75 inch wide 0.25 inch thick Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). copper traces in still air. Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Temperature rise is highly Quantities less than full reel available: in tape (not machine ready) or with leader and dependent on many factors trailer ( 25 charge). including pcb land pattern, trace B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is size, and proximity to other com- elimnating the need for multiple packaging codes. When ordering, simply change the ponents. Therefore temperature last letter of your part number from B to C. rise should be verified in appli - D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not cation conditions. stocked (4000 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 769-1 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.XXX Document 769-2 Shielded Power Inductors XFL4015 Typical L vs Current Typical L vs Frequency 0.03 10 0.25 HalogenHalogen 0.20 0.18 H FrFreeee 0.15 1.2 H 0.10 1 0.70 H 0.05 0.47 H 0 AECAEC 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 ++ QQ200200 121255CC 0.33 H Current (A) 0.18 H 0.5 0.1 0.4 0.3 0.33 H 0.2 0.01 0.1 0.1 1 10 100 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Frequency (MHz) Current (A) 0.8 0.157 0.012 0.7 4,0 0,3 0.6 0.5 0.47 H 0.4 0.3 0.157 0.012 0.2 4,0 0,3 0.1 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Current (A) Dash Indicates direction of terminals and number start (short) lead. Connect high dv/dt 10 here forlowest EMI. 8 6 0.063 * max 0.70 H 1,60 4 0.032 0.002 0.128 typ 2 0,82 0,05 3,25 0 0.062 0.010 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Terminal 1,57 0,25 * For optional tin-lead and tin-silver- Dash thickness (typ) Current (A) number (in / mm) copper terminations, dimensions are 0.093 for the mounted part. Dimensions 1.6 -181 0.0039 / 0.10 2,37 before mounting can be an -331 0.0039 / 0.10 additional 0.005 inch / 0.13 mm. 1.2 -471 0.0039 / 0.10 1.2 H -701 0.0039 / 0.10 -122 0.0023 / 0.06 0.134 0.8 3,4 0.4 0 0.038 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0,98 Current (A) Recommended inches Dimensions are in Land Pattern mm Document 769-2 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)