Web Sample Tools & Support Document 1048-1 page & buy software & FAQ Shielded Power Inductors XFL4030 Halogen High current up to 5.2 A Free Very low DCR as low as 3.6 mOhms AEC-Q200 Grade 1 (40C to +125C) Core material Composite AEC Environmental RoHS compliant, halogen free + Q200 125C Terminations Tin-silver over copper. Other terminations available at additional cost. Weight 0.25 0.27 g Operating voltage 0 20 V Ambient temperature 40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Storage temperature Component: 55C to +165C. Tape and reel packaging: 55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Packaging 500/7 reel 2000/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787 PCB Washing.pdf 3 5 6 2 4 DCR (mOhms) Isat (A) Irms (A) Inductance SRF typ 1 Part number 20% (H) typ max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise XFL4030-471ME 0.47 3.6 4.4 110 4.5 4.9 5.2 14.0 18.0 XFL4030-102ME 1.0 5.5 6.6 67 3.6 3.9 4.1 11.0 14.5 XFL4030-202ME 2.0 9.5 11.5 46 2.5 2.8 3.0 7.80 11.8 XFL4030-302ME 3.0 17.0 20.5 39 1.8 2.1 2.2 6.10 8.00 XFL4030-472ME 4.7 25.0 30.0 34 1.7 2.0 2.1 5.70 7.50 1. When ordering, please specify packaging code: Irms Testing XFL4030-472MEC Irms testing was performed on Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities 0.75 inch wide 0.25 inch thick less than full reel available: in tape (not machine ready) or with leader and trailer ( 25 charge). copper traces in still air. B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your Temperature rise is highly part number from B to C. dependent on many factors D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked including pcb land pattern, (2000 parts per full reel). trace size, and proximity to 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. other components. Therefore 3. DCR measured on a micro-ohmmeter. temperature rise should be 4. SRF measured using Agilent/HP 4395A or equivalent. verified in application conditions. 5. DC current at 25C that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 7. Electrical specifications at 25C. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 1048-1 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.XXX Document 1048-2 Shielded Power Inductors XFL4030 Typical L vs Current Typical L vs Frequency 100 0.6 0.5 0.47 H Halogen 0.4 Free 0.3 0.2 10 0.1 4.7 H 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 AEC + Q200 125C 3.0 H Current (A) 2.0 H 1.6 1 1.0 H 1.2 1.0 H 0.47 H 0.8 0.4 0.1 0.1 1 10 100 0 Frequency (MHz) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Current (A) 3.0 0.157 0.012 2.5 4,0 0,3 2.0 H 2.0 Note:Parts manufactured prior to 2011 may not have 1.5 orientation indicator. 1.0 0.157 0.012 4,0 0,3 0.5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 Current (A) Dash Indicates direction of terminals and number start (short) lead. Connect high dv/dt 5 here forlowest EMI. 4 3.0 H 3 0.122 * max 2 3,10 1 0.032 0.002 0 0.128 typ 0,82 0,05 0 0.25 0.50 0.75 1.0 0.2.5 1.50 1.75 2.0 2.25 3,25 Current (A) 0.062 0.010 1,57 0,25 Terminal * For optional tin-lead and tin-silver- 6.0 Dash thickness (typ) copper terminations, dimensions are number (in / mm) 5.0 4.7 H 0.093 for the mounted part. Dimensions -471 0.0079 / 0.20 2,37 before mounting can be an 4.0 -102 0.0079 / 0.20 additional 0.005 inch / 0.13 mm. 3.0 -202 0.0059 / 0.15 -302 0.0039 / 0.10 2.0 0.134 -472 0.0039 / 0.10 3,4 1.0 0 0 0.25 0.50 0.75 1.0 0.2.5 1.50 1.75 2.0 2.25 Current (A) 0.038 0,98 Recommended inches Dimensions are in mm Land Pattern Document 1048-2 Revised 11/24/21 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2021 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)