Web Sample Tools & Support
Document 1039-1
page & buy software & FAQ
Shielded Power Inductors XFL7015
Halogen
Very low profile, only 1.5 mm tall
Free
High current and very low DCR
AEC-Q200 Grade 1 qualified (40C to +125C ambient)
Environmental RoHS compliant, halogen free
AEC
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
+
Q200 125C
terminations available at additional cost.
Core material Composite
Weight 0.37 0.38 g
Operating voltage 0 20 V
Ambient temperature 40C to +125C with (40C rise) Irms current.
Maximum part temperature +165C (ambient + temp rise). Derating.
Storage temperature Component: 55C to +165C.
Tape and reel packaging: 55C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
3 5 6
2 DCR (mOhms) 4 Isat (A) Irms (A)
Inductance SRF typ
1
Part number 20% (H) typ max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise
XFL7015-251ME_ 0.25 3.90 4.30 80 9.0 12.5 14.5 16.0 20.0
XFL7015-471ME_ 0.47 5.80 6.38 56 6.5 10.0 11.5 12.5 17.0
XFL7015-681ME_ 0.68 7.70 8.47 49 4.7 8.5 10.0 11.5 15.0
XFL7015-102ME_ 1.0 13.6 16.0 39 4.0 6.3 7.4 7.5 10.5
XFL7015-152ME_ 1.5 18.3 22.6 33 3.0 5.5 6.6 6.0 8.0
1. When ordering, please specify termination and packaging codes:
Irms Testing
XFL7015-152MEC
Irms testing was performed on
Termination: E = RoHS compliant tin-silver over copper.
0.75 inch wide 0.25 inch thick
Special order:
copper traces in still air.
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Temperature rise is highly depen-
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). dent on many factors including
pcb land pattern, trace size, and
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead. proximity to other components.
Therefore temperature rise
D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3000 parts per full reel). should be verified in application
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. conditions.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25C.
Refer to Doc 362 Soldering Surface Mount Components before soldering.
Document 1039-1 Revised 11/02/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sgXXX
Document 1039-2
Shielded Power Inductors XFL7015
L vs Current L vs Frequency
10
0.4
0.3
0.25 H
Halogen
Free
0.2
0.1
1.5 H
0
1.0 H
01 2 3 4 5 6 7 89 10 11 12 13 14 15
1
AEC
+ 0.68 H
Q200 125C Current (A)
0.47 H
0.6
0.5
0.47 H 0.25 H
0.4
0.3
0.2
0.1
0.1
0.1 1 10 100
0
Frequency (MHz)
01 2 3 4 5 6 7 89 10 11 12
Current (A)
1.0
0.8
0.295 0.020
0.6
0.68 H
7,5 0,5
0.4
0.2
0
0.295 0.020
01 2 3 4 5 6 7 89 10 11
7,5 0,5
Current (A)
1.6
* For optional tin-lead and tin-silver-
Dash Indicates start lead
copper terminations, dimensions
1.2
number and orientation of
are for the mounted part.
terminations
Dimensions before mounting can be
1.0 H
0.8
an additional 0.005 inch / 0.13 mm.
0.4
Recommended
0
Land Pattern
0.059
01 2 3 4 5 6 7 89 10
max
*
C 0.186
1,5
Current (A)
(see table)
4,72
2.4
1.8
A B
1.5 H
(see table) (see table)
1.2
0.6
0.070
0.123 0.010
0
1,78
3,12 0.25
01 2 3 4 5 6 7 8 9
Current (A) AC
0.008 in 0.002 in
inches
Dimensions are in Dash 0,20 mm B 0,05 mm
mm
number (in / mm) (in / mm) (in / mm)
-251 0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
-471 0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
-681 0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
-102 0.239 / 6.08 0.242 / 6.16 0.055 / 1.40
-152 0.239 / 6.08 0.242 / 6.16 0.055 / 1.40
Packaging 750/7 reel; 3000/13 reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 1.65 mm pocket depth
Document 1039-2 Revised 11/02/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Inductance (H) Inductance (H) Inductance (H) Inductance (H) Inductance (H)
Inductance (H)