Web Sample Tools & Support
Document 646-1
page & buy software & FAQ
Shielded Power Inductors XPL2010
Halogen
Ultra-miniature, magnetically shielded power inductors
Free
AEC-200 Grade 1 qualified (40C to +125C ambient)
Very low DCR, excellent current handling, soft saturation
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
AEC
Weight 20 mg
+
Q200 125C
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over
nickel over silver-platinum. Other terminations available at additional cost.
Ambient temperature 40C to +125C with (40C rise) Irms current.
Maximum part temperature +165C (ambient + temp rise). Derating.
Storage temperature Component: 55C to +165C.
Tape and reel packaging: 55C to +80C
Resistance to soldering heat Max three 40 second reflows at
+260C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7 reel; 7500/13 reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
3 5 6
2 DCR (Ohms) 4 Isat (A) Irms (A)
Inductance SRF typ
1
Part number 20% (H) nom max (MHz) 10% drop 20% drop 30% drop 20C rise 40C rise
XPL2010-201ML_ 0.20 0.024 0.027 408 2.80 3.45 3.75 2.2 2.8
XPL2010-331ML_ 0.33 0.031 0.035 309 1.90 2.75 3.05 1.9 2.6
XPL2010-501ML_ 0.50 0.040 0.045 218 1.80 2.35 2.64 1.7 2.3
XPL2010-681ML_ 0.68 0.057 0.063 152 1.55 1.95 2.19 1.5 2.1
XPL2010-821ML_ 0.82 0.068 0.075 132 1.25 1.65 1.90 1.3 1.7
XPL2010-102ML_ 1.0 0.081 0.089 117 1.20 1.60 1.80 1.1 1.6
XPL2010-152ML_ 1.5 0.105 0.116 80 0.950 1.30 1.50 1.0 1.4
XPL2010-222ML_ 2.2 0.156 0.173 75 0.940 1.20 1.35 0.96 1.3
XPL2010-332ML_ 3.3 0.207 0.228 55 0.700 0.925 1.05 0.79 1.1
XPL2010-472ML_ 4.7 0.336 0.370 40 0.580 0.750 0.845 0.74 1.0
XPL2010-682ML_ 6.8 0.421 0.463 33 0.450 0.620 0.725 0.64 0.87
XPL2010-822ML_ 8.2 0.457 0.503 30 0.440 0.600 0.670 0.55 0.75
XPL2010-103ML_ 10 0.555 0.611 28 0.390 0.525 0.610 0.49 0.66
XPL2010-183ML_ 18 1.47 1.60 31 0.500 0.560 0.590 0.32 0.43
XPL2010-223ML_ 22 1.89 2.00 25 0.410 0.470 0.510 0.28 0.39
XPL2010-333ML_ 33 2.59 2.85 20 0.330 0.380 0.410 0.23 0.31
XPL2010-473ML_ 47 3.96 4.25 17 0.270 0.300 0.320 0.18 0.25
XPL2010-563ML_ 56 4.48 4.82 15 0.240 0.280 0.300 0.17 0.24
XPL2010-683ML_ 68 6.14 6.56 13 0.210 0.250 0.280 0.15 0.20
XPL2010-823ML_ 82 6.45 6.90 12 0.200 0.240 0.260 0.15 0.20
XPL2010-104ML_ 100 8.48 9.27 11 0.180 0.214 0.232 0.13 0.17
XPL2010-224ML_ 220 19.2 21.1 7.1 0.122 0.143 0.161 0.086 0.116
1. When ordering, please specify termination and packaging codes: 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
XPL2010-103MLC
4. SRF measured using Agilent/HP 4395A or equivalent.
Termination: L = RoHS compliant tin-silver-copper (96.5/3/0.5) over
5. DC current at 25C that causes an inductance drop of 30% (typ) from
tin over nickel over silver.
its value without current. Click for temperature derating information.
Special order: S = non-RoHS tin-lead (63/37).
6. Current that causes the specified temperature rise from 25C ambient.
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
This information is for reference only and does not represent absolute
tape (2000 parts per full reel).
maximum ratings. Click for temperature derating information.
B = Less than full reel. In tape, but not machine ready.
7. Electrical specifications at 25C.
To have a leader and trailer added ($25 charge),
Refer to Doc 362 Soldering Surface Mount Components before soldering.
use code letter C instead.
D = 13 machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
Document 646-1 Revised 11/26/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sgDocument 646-2
Shielded Power Inductors XPL2010 Series
Typical L vs Current Typical L vs Frequency
1000 1000
220 H
220 H
Halogen
Free 100 H
100 H
100 100
33 H 33 H
10 H
10 H
10 10
AEC
+
Q200 125C
3.3 H 3.3 H
1.0 H
1.0 H
1 1
0.33 H
0.33 H
0.1 0.1
0.01 0.1 1 10 0.1 1 10 100
Current (A) Frequency (MHz)
Products manufactured
0.079 0.008
prior to June 2015
2,0 0,2
may not havea dot.
Dot
indicates
0.075 0.008
start
1,9 0,2
Recommended
0.039
max
Land Pattern
1,00
0.053
1,35
0.065 0.008 0.071
1,65 0,20
1,80
0.018 0.008 0.024
0.014
0,45 0,20 0,60
min
0,35
0.035
typ
inches
0,90
Dimensions are in
mm
Tape and reel orientation
Document 646-2 Revised 11/26/18
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com Coilcraft Inc. 2018
This product may not be used in medical or high
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@coilcraft.com.cn
Specification subject to change without notice.
Please check web site for latest information.
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Inductance (H)
Inductance (H)