FFFF EEEE DDDD CCCC BBBB AAAA NOTES: c 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265C FOR 8 SEC. 4,74 0,3 AND SOLDER PREHEAT 150C FOR 180 SEC.) 2. IP RATING: IP 67 6,35 0,3 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST min. 50in NICKEL PLATING over COPPER DDDD DDDD 5. INSULATORS: PBT GF UL 94 V-0, BLACK ( 5 : 1 ) 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0 BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL o PLEASE ADD 3 for 8in HARD GOLD over min. 50in NICKEL 9. METAL BRACKETS: ZINC DIE CAST 300in COPPER/40-120in NICKEL/120-200in TIN 10. WASHERS: COPPER ALLOY 80in NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL c 12. PCB-SNAPS: COPPER ALLOY min. 200in TIN over 80in NICKEL PCB-HOLE: n3.1 0.1 PCB THICKNESS 1.6mm 13. OPERATING TEMPERATURE: -40C to +105C d 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00077o CONEC ABC +0,02 8 - 0,23 0,3 + c CC 39,4 CC CC CC - 0 +0,12 25 - 0,13 +0 16,46 - 0,25 3,2 0,2 METAL BRACKET PRESS FOR FIXING ON PCB SEALING BBBB BBBB COMPOUND O-RING 15-00077o PCB SNAP CONEC ABC 4-40 UNC SEE NOTE 16 c SW 4,8 4-40 UNC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. scale: 2:1 (5:1) tolerance material: see notes dim. in mm AAAA AAAA date name title: drawn 17.10.08 Schmidt D-SUB FEMALE 90 appd. 23.10.08 Fischer 9pos. SOLDER PIN ANGLED norm with metal bracket, hexlocking screw and snap dwg no: 1 x d 5468 05.01.15 K.H. d-old DIN- 4 x c 3435 05.10.09 HS A3 RR RR 15K1A285 a Origin sh:1/2 RoHS compliant rev. description date name part no: o (see note 8) 15-00077 FFFF EEEE DDDD CCCC BBBB AAAA 10 0,3 + 21,1 - 0 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 4,6 DO NOT ALTER CAD DRAWING BY HAND 0,4 + 13,5 - 0,3 9,4 0,4 + 13,1 - 0,3 0,4 + 10,75 - 0,3 0,17 0,4 + + 6 6,13 10,2 - 0,08 - 0,3 0,25 + 3,6 n0,6 0,05 (9x) - 0R 4 0,13 3, FFFF EEEE DDDD CCCC BBBB AAAA P.C.B. HOLE DRILLINGS DDDD DDDD 0,12 + 25 - 0,13 0,1 5,49 0,1 n3,1 (2x) 2,74 0,1 1 0,1 + n1 (9x) - 0 b b P.C.B. EDGE c c CC CC CC CC FRONTPANEL 1,37 0,1 4,11 0,1 RECOMMENDED PANEL CUT-OUT 20,5 0,1 i 0,26 A B BBBB BBBB 0,26 i B 25 0,1 A scale: 5:1 tolerance material: see sheet 1 dim. in mm AAAA AAAA date name title: drawn 17.10.08 Schmidt P.C.B. HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT norm D-SUB Female 9pos. Solder pin angled 90 dwg no: 2 x c 3435 05.10.09 HS d-old DIN- 2 x b 3344 15.04.09 HS A3 RR RR 15K1A285 a Origin sh:2/2 rev. description date name part no: SEE SHEET 1 FFFF EEEE DDDD CCCC BBBB AAAA 1 10 10,75 n3,1 0,05 (2x) 6,85 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 11,4 0,1 6,31 0,1 2,84 0,1