F E D C B A +0,5 3,3 - 6,35 0,3 0,3 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD ( 5 : 1 ) BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. D D SEALING COMPOUND 0,3 + 53,09 - 0,15 47,04 0,13 +0 38,5 - 0,25 b SEALING GASKET 0,02 + 8 - 0,23 0,05 n0,65 (44x) C C FIXING-PLATE PRESS FOR 3,2 0,2 METAL BRACKET FIXING ON PCB PCB SNAP 15-00763o CONEC ABC 4-40 UNC SEE NOTE 16 SW 4,8 4-40 UNC b NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265C FOR 8 SEC. AND SOLDER PREHEAT 150C FOR 180 SEC.) B B 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST min. 50in NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0 6. SEALING GASKET: SILICONE 7. SEALING COMPOUND: EPOXY 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO.): o PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL 9. METAL BRACKETS: ZINC DIE CAST 300in COPPER/40-120in NICKEL/120-200in TIN 10. WASHERS: COPPER ALLOY 80in NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-SNAPS: COPPER ALLOY min. 200in TIN over 80in NICKEL PCB-HOLE: n3,1 0,1mm PCB THICKNESS 1,6mm 13. FIXING-PLATE: PBT GF UL 94 V-0 BLACK 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max. 67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00763o CONEC ABC (see note 8) scale: 2:1 (5:1) tolerance material: SEE NOTES dim. in mm A A date name title: drawn 12.01.2016 Heinrich D-SUB FEMALE 90 HD appd. 13.01.2016 Fischer 44pos. SOLDER PIN ANGLED norm with closed 4-40 UNC thread,metal bracket,fixing-plate,snap dwg no: d-old DIN- 2 x b 6417 06.04.2017 Unkrer A3 R 15K1A1688 a Original sh: 1 RoHS compliant rev. description date name part no: 15-00763o (see note 8) F E D C B A +0,3 12,8 - 0,15 4,6 9,4 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND +0,4 +0,4 9,6 14,23 - 0,3 - 0,3 0,4 0,4 + + 11,69 13,85 - 0,3 - 0,3 0,4 + 9,15 - 0,3 0,25 + 2,55 - 0 0,17 + 5,78 - 0,080 R3,4 ,13 F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) D D 47,04 0,13 30,861 0,05 1,143 0,1 0,1 0,1 0,03 2,286 15,51 8,026 1 0,1 n3,1 (2x) 0,1 + C C n0,9 (44x) - 0 P.C.B. EDGE FRONTPANEL RECOMMENDED PANEL CUT-OUT 42,5 0,1 i 0,26 A B B B i 0,26 B 47,04 0,1 A scale: 4:1 tolerance material: SEE SHEET 1 dim. in mm A A date name title: drawn 12.01.2016 Heinrich P.C.B HOLE DRILLINGS appd. 13.01.2016 Fischer RECOMMENDED PANEL CUT-OUT norm D-SUB Female 90 HD 44pos. Solder pin angled dwg no: d-old DIN- A3 R 15K1A1688 a Original sh: 2 rev. description date name part no: SEE SHEET 1 F E D C B A 1 10 9,3 6,75 0,05 n3,1 (2x) THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 11,4 0,1 6,38 0,1 2,54 0,1 2,54 0,1