F E D C B A 0,5 + AT ALL TIMES WATER RESISTANT 3,3 - 0,3 6,35 0,3 CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER ( 5 : 1 ) RESISTANT CAP OR WATER TIGHT HOOD. D D SEALING COMPOUND 0,3 + 39,22 - 0,15 0,13 + 33,32 - 0,12 POS. 1 +0,23 25,14 - 0,02 POS. 10 POS. 19 b SEALING GASKET 0,25 + 8,23 - 0 n0,6 0,05 (26x) RUBBER GASKET PLACED ON TOP SURFACE OF MALE C C FIXING-PLATE INSULATOR PRESS FOR METAL BRACKET 0,2 3,2 FIXING ON PCB PCB SNAP 15-00765o CONEC ABC 4-40 UNC SEE NOTE 16 SW4,8 4-40 UNC b NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265C FOR 8 SEC. AND SOLDER PREHEAT 150C FOR 180 SEC.) 2. IP RATING: IP 67 B B 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST min. 50in NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0 6. SEALING GASKET: SILICONE 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO.): o PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL 10. METAL BRACKETS: ZINC DIE CAST 300in COPPER/40-120in NICKEL/120-200in TIN 11. WASHERS: COPPER ALLOY 80in NICKEL 12. HEXLOCKING SCREWS: STAINLESS STEEL 13. PCB-SNAPS: COPPER ALLOY min. 200in TIN over 80in NICKEL PCB-HOLE: n3,1 0,1mm PCB THICKNESS 1,6mm 14. FIXING-PLATE: PBT GF UL 94 V-0 BLACK 15. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max. 67Ncm (6 in.LB) 17. CONNECTOR IS PART MARKED: 15-00765o CONEC ABC (see note 9) scale: 2:1 (5:1) tolerance material: SEE NOTES dim. in mm A A date name title: drawn 12.01.2016 Heinrich D-SUB MALE 90 HD appd. 13.01.2016 Fischer 26pos. SOLDER PIN ANGLED norm with closed 4-40 UNC thread,metal bracket,fixing-plate,snap dwg no: d-old DIN- 2 x b 6417 06.04.2017 Unkrer A3 R 15K1A1690 a Original sh: 1 RoHS compliant rev. description date name part no: o (see note 9) 15-00765 F E D C B A 0,3 + 12,8 - 0,15 4,6 9,4 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 0,4 + 9,6 - 0,3 +0,4 14,31 - 0,3 0,4 + 13,85 - 0,3 0,4 + 11,77 - 0,3 0,4 + 9,23 - 0,3 +0,25 2,55 - 0 +0,12 5,64 - 0,18R3,4 0,13 F E D C B A P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) 0,13 + D D 33,32 - 0,12 0,1 19,431 1,143 0,1 9,652 0,1 7,01 0,1 2,286 0,1 1 n3,1 0,1 (2x) +0,1 0,9 (26x) - 0 C C P.C.B. EDGE FRONTPANEL RECOMMENDED PANEL CUT-OUT 28,8 0,1 i 0,26 A B B B i 0,26 B 0,1 33,32 A scale: 5:1 tolerance material: SEE SHEET 1 dim. in mm A A date name title: drawn 12.01.2016 Heinrich P.C.B. HOLE DRILLINGS appd. 13.01.2016 Fischer RECOMMENDED PANEL CUT-OUT norm D-SUB Male 90 HD 26 pos. Solder pin angled dwg no: d-old DIN- A3 R 15K1A1690 a Original sh: 2 rev. description date name part no: SEE SHEET 1 F E D C B A 1 10 ,6 9 n3,1 0,05 (2x) 6,75 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 11,4 0,1 6,38 0,1 0,1 2,54 0,1 2,54