FFFF EEEE DDDD CCCC BBBB AAAA b NOTES: 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 240C FOR 5 SEC. / AND SOLDER PREHEAT 120C FOR 120 SEC. ) +0,5 ( 5 : 1 ) 3,3 - 6,35 0,3 0,3 2. METALSHELLS: COPPER ALLOY min. 315in TIN over 40-80in NICKEL 3. INSULATORS: PBT GF UL 94 V-0 BLACK 4. CONTACTS: COPPER ALLOY PLATING (SEE PART NO.): DDDD DDDD o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) o PLEASE ADD B for 20in HARD GOLD over min. 50in NICKEL o PLEASE ADD C for 30in HARD GOLD over min. 50in NICKEL SEALING 5. METAL BRACKETS: ZINC DIE CAST COMPOUND 300in COPPER/ 40-120in NICKEL/ 120-200in TIN 6. THREADED INSERTS: COPPER ALLOY min. 200in TIN over 80in NICKEL 7. PCB-SNAPS: COPPER ALLOY min. 200in TIN over 80in NICKEL PCB-HOLE: n3,10,1 PCB THICKNESS 1,6mm 8. COLLARS: COPPER ALLOY NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST NICKEL PLATED 11. FIXING PLATE: PBT GF UL 94 V-0 BLACK 12. O-RING: SILICON BLUE 13. RUBBER GASKET: TPE 14. SEALING COMPOUND: PUR BLUE 15. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.40Ncm (3.5 in.LB) CC CC CC CC 17. CONNECTOR IS PART MARKED: 6HDD44PoY99R40X CONEC ABC (see note 4) 0,22 + 8,26 - 0,03 +0,3 61,4 - 0 Pos. 1 RUBBER GASKET 0,13 PLACED ON TOP SURFACE 47,04 Pos. 16 OF MALE INSULATOR 0,23 + 38,86 - 0,02 Pos. 31 0,2 3,2 PRESS FOR BBBB BBBB FIXING PLATE METAL BRACKET FIXING ON PCB PCB SNAP O-RING 6HDD44PoY99R40X CONEC ABC 4-40 UNC SEE NOTE 10 b SEE NOTE 17 SW 4,8 4-40 UNC scale: 2:1 (5:1) tolerance material: SEE NOTES AT ALL TIMES WATER RESISTANT dim. in mm AAAA AAAA CONNECTORS NOT IN USE date name title: drawn 09.08.10 Henneboel D-SUB HD MALE 90 SHOULD BE COVERED appd. 09.08.10 Fischer 44pos. SOLDER PIN ANGLED WITH A CONEC WATER norm threaded insert, metal bracket, fixing-plate, snap RESISTANT CAP OR dwg no: d-old 18K1A464 DIN- WATERTIGHT HOOD. 2 x b 4784 11.06.13 HS A3 RR RR 15K1A705 a Original sh: 1 Directive 2002/95/EC RoHS compliant rev. description date name part no: o 6HDD44P Y99R40X (see note 4) FFFF EEEE DDDD CCCC BBBB AAAA 10 0,3 + 21,1 - 0 9,4 4,6 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 0,3 10,68 0,25 + 3,6 0,3 n0,6 0,05 (44x) 8,14 - 0 +0 5,7 0,3 - 0,31 5,6 7,15 0,2 9,9 0,2 max. 2 ,1 R3,4 0 3 FFFF EEEE DDDD CCCC BBBB AAAA P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) DDDD DDDD 47,04 0,13 0,05 33,147 0,1 1,143 0,1 0,1 0,03 2,286 16,526 7,01 1 n3,1 0,1 (2x) P.C.B. EDGE +0,1 n0,9 (44x) - 0 FRONTPANEL CC CC CC CC RECOMMENDED PANEL CUT-OUT 42,5 0,1 i 0,26 A B BBBB BBBB i 0,26 B 47,04 0,1 A scale: 3:1 tolerance material: see sheet 1 dim. in mm AAAA AAAA date name title: drawn 09.08.10 Henneboel P.C.B. HOLE DRILLINGS appd. 09.08.10 Fischer PANEL CUT-OUT norm D-SUB Male 44pos. HD SOLDER PIN 90 dwg no: d-old DIN- A3 RR RR 15K1A705 a Original sh: 2 rev. description date name part no: SEE SHEET 1 FFFF EEEE DDDD CCCC BBBB AAAA 1 10 10,75 4,85 n3,1 0,1 (2x) THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 11,4 0,1 3,3 0,1 2,54 0,1 2,54 0,1