H G F E D C B A NOTES: PCB hole pattern 1. MATERIALS AND FINISHES: F - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 F - CONTACTS: COPPER ALLOY, PLATING MATING AREA: 0,8 M GOLD OVER NICKEL PLATING TERMINATION AREA: 0,8-1,5 M TIN (SN 100) 22x 0,05 6 suggested 2. ELECTRICAL CHARACTERISTICS: hole size 0,05 CREEPING AND CLEARANCE DISTANCE MINIMUM SPACING: 2 - CONTACTS 5-16 TO ANY OTHER CONTACT WITHIN THIS GROUP: 0,7 MM - CONTACTS 17-24 TO ANY OTHER CONTACT WITHIN THIS GROUP: 2,5 MM 13 A 46,1 max. 33 - CONTACT 25 TO 26: 5,5 MM - CONTACTS 27-34 TO ANY OTHER CONTACT WITHIN THIS GROUP: 1,4 MM - CONTACTS 13-16 TO 17-20: 3,0 MM - CONTACTS 21-24 TO 25-26: 4,0 MM - CONTACTS 25-26 TO 27-29: 2,0 MM B CONTACT CURRENT RATING: E - POWER CONTACTS: 16 AMPERES MINIMUM, E TESTED PER CSA C22.2 NO. 182.3-M1987, ALL CONTACTS UNDER LOAD 0,05 3 8x - SIGNAL CONTACTS: 2 AMPERES NOMINAL suggested INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: hole size 9,4 0,05 - POWER CONTACTS: 0,0022 OHM MAX. - SIGNAL CONTACTS: 0,0085 OHM MAX. 13,7 0,05 0,05 10 INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 3. POSITIONS WITHOUT CONTACTS: 1, 2, 3, 4 18,5 0,05 28,6 max. 17,5 max. 12 0,05 4. WORKING TEMPERATURE: -55C TO +125C 21,2 0,05 14,5 0,05 5. PRESS-FIT PART OF CONTACTS ARE PATENT PROTECTED Contact 27 6. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC datum plane 0,05 22,55 23,9 0,05 D D 26,6 0,05 Drilled hole 1,75 0,025 (8x) Contact 27 n Drilled hole datum plane 1,15 0,025 (22x) n Copper thickness minimum 25m Copper thickness minimum 25m Tin thickness Tin thickness minimum 15m minimum 15m C C Finished hole Finished hole 0,09 +0,09 + (22x) 1,6 (8x) 1 n n - 0,06 - 0,06 see note 6 B ( 10 : 1 ) A ( 10 : 1 ) B B 22 Signal contact (Pos. 5-24,27,32) 3 8 Power contact (Pos. 25,26,28-31,33,34) 2 1 Case 34pos. female 1 quantity part description item dwg no. / norm material partlist scale: 2,5:1 (10:1) finish: tolerance 1 2 3 see notes material: see notes ISO 2768-m dim. in mm date name title: Mankopf drawn 22.08.05 FEMALE CONNECTOR 30pos. appd. 22.08.05 Khle PRESS-FIT STRAIGHT A norm A AdvancedTCA d-old dwg no: Inventor DIN- A2 R 46K2A001 sh: 1 rev. part no: description date name ATC30W08FGE1S5X H G F E D C B A +0,1 n ,65 (2x) 2 - 0 +0,1 n1,75 - 0 20,9 max. 4,75 22,2 1,3 9,59 0,05 3,9 0,05 6,6 0,05 0,05 3,9 0,05 2,2 THIS DRAWING MAY NOT BE COPIED OR 0,05 2,2 REPRODUCED IN ANY WAY, AND MAY NOT S D ON TO A THIRD PARTY WITHOUT BE PAS E WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 4,5 0,05 4,5 0,05X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for AMC / AMC B+ Connectors category: Click to view products by CONEC manufacturer: Other Similar products are found below : CN084A-0002 CN084A-05ME-1 CN084A-10ME-1 CN084A-02M0-1 CN084A-08ME-4 CN080-170-0011 CN084-170-1000-1000-0 75800- 0001