MS3476A20-39S Conesys

26482 S 2 MIL-DTL-26482 Features and Application Series 2 Features and Application Closed-Entry Socket Insert Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. MIL-DTL-26482 Series 2, bayonet coupling, rear-removable crimp contact connectors were designed as an upgrade to Interfacial Pin Insert Seal Raised moisture barriers MIL-DTL-26482 Series 1. Series 2 connectors are intermount- around each pin, which mate into lead-in chamfers of hard able and interchangeable with both solder and front-release face socket insert, provide individual contact sealing. Inter- crimp Series 1. They are also identical to the inactivated facial seal is never touched by service tools. MIL-DTL- 83723 Series I connectors. Elastomer Wire Sealing Grommet Sealing over a wide Series 2 connectors are widely used on commercial, military range of wire diameters is assured by a triple wire seal in and aerospace systems requiring general-purpose, miniature each cavity at the rear of the connector. cylindrical bayonet coupling connectors. Superior Contact Stability Rear release crimp contact This family of connectors is offered in 4 receptacle-mounting system features a stamped beryllium-copper retaining clip styles. They include narrow flange wall mounting receptacles, captivated by molded-in shoulders of each contact cavity in wide flange wall mounting receptacles, cable connecting recep- the insulator. A rear-inserted M81969 plastic tool expands tacles and jam nut mounting receptacles which incorporate O the tines beyond the shoulder, releasing the contact. ring seals, designed for rear panel D hole mounting. Plugs are available in two designs, with and without RFI grounding. Thirty-three insert arrangements per MIL-STD-1669 are tooled and qualified to MIL-DTL-26482 Series 2, utilizing 3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and 12, terminating wire sizes from 24 to 12 gauge. These connectors are available in wide range of shell materials and finishes. Aluminum shells are offered in electroless nickel, olive drab cadmium and black anodic. Other finishes such as zinc cobalt are available upon request to commercial callouts only. In addition, we offer passivat - ed stainless steel shells with standard environment-resisting inserts (commercial callouts only), and for highly corrosive environments, nickel-aluminum-bronze shells with standard environment-resisting inserts (commercial callouts only). Universal I/R Tool A single, expendable plastic tool is used for both insertion and removal of contacts. Insert Polarization Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com 126 sales aero-electric.com 26482 S 2 MIL-DTL-26482 Performance Specifications Series 2 Performance Specifications Durability Mated connectors withstand a minimum of 250 mating Operating Temperature Range cycles for RFI plug (MS3475) and 500 cycles for standard Classes A, L and S*: -55C to +200C (-67F to +392F) plug (MS3476). Classes W, Z* and BN*: -55C to +175C (-67F to +347F) Shock and Vibration Requirements Material and Finish Data (Class) Wired, mated connectors shall not be damaged, coupling A aluminum shell, black anodized finish (RoHS) ring shall not loosen, and there shall be no interruption of L aluminum shell, electroless nickel finish electrical continuity longer than one microsecond when W aluminum shell, olive drab cadmium over nickel base subjected to the following: S* stainless steel shell, passivated (RoHS) BN* aluminum shell, black nickel finish (Aero P/N only) Shock Z* = Aluminum shell, Black Zinc Nickel finish (RoHS) Mated connectors withstand a pulse of approximate half (Aero p/n only) sine wave of 300 G magnitude with duration of three milliseconds applied in each direction of the three major axes. Corrosion Resistance Classes A, S*, W and Z* withstand 500-hour salt spray. Vibration Class BN* withstands 350-hours salt spray. Class L with- Mated connectors withstand the following vibration levels: stands 48-hour salt spray. Random vibration per MIL-STD-202, method 214, test condition II, letter J. Environmental Seal Wired, mated connectors with specified accessories at - Shielding Effectiveness tached, shall meet the altitude-immersion test specified in RFI attenuation at the specified frequency meets the require - MIL-DTL-26482 Series 2. ments of MIL-DTL-26482 Series 2. RFI shielding effectiveness of mated connectors with Fluid Resistance RFI backshells is measured in a triaxial radio frequency Connectors resist specified immersions in MIL-PRF-7808 leakage fixture. (lubricating oil), MIL-PRF-23699 (lubricating oil), MIL-PRF-5606 (hydraulic fluid), M2-V Chevron oil, Cool - Shell-to-Shell Conductivity anol 25, ASTM D4814 (gasoline), SAE-AMS1424 Type I With RFI spring fingers, the maximum potential drop (defrosting fluid), MIL-DTL-5624 (JP-5), and solvents shall not exceed 5 millivolts. specified in Method 215 of MIL-STD-202. Without spring fingers, the maximum potential drop shall not exceed 200 millivolts. * Not on QPL, can be supplied to Aero-Electric P/N only. Voltage Rating Suggested Operating Voltage** Test Voltage Test Voltage Test Voltage Test Voltage (Sea Level) Sea Level 50,000 Ft. 70,000 Ft. 110,000 Ft. Service Rating AC (RMS) DC V RMS V RMS V RMS V RMS I 600 850 1,500 500 375 200 II 1,000 1,275 2,300 750 500 200 ** To be used by designer only as a guide. www.conesys.com 127 sales aero-electric.com