USB2-F-7101 Connective Peripherals

USB2-F-7x01 Full-Speed USB to 1-Port CANBus Adapter Datasheet Document Reference No.: CP 000050 Version 1.4 Issue Date: 2019-03-26 The USB2-F-7001 and USB2-F-7101 provide a simple method of adapting CANbus devices to USB. The USB2-F-7101adds optical isolation for the CAN interface. Flexible mounting options allow the USB2-F-7001 and USB2-F-7101 to be used in a variety of applications. Indicator LEDs provide functional status. Connective Peripherals Pte Ltd 178 Paya Lebar Road, 07-03 Singapore 409030 Tel.: +65 67430980 Fax: +65 68416071 E-Mail (Support): support connectiveperipherals.com Web: www.connectiveperipherals.com/products Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Connective Peripherals Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Connective Peripherals Pte Ltd, 178 Paya Lebar Road, 07-03 Singapore 409030. Registered Number: 201617872E Copyright Connective Peripherals Pte Ltd USB2-F-7x01 Full-Speed USB to 1-Port CANBus Adapter Datasheet Version 1.4 Document Reference No.: CP 000050 Clearance No.: CP 040 Table of Contents 1 Introduction ................................................................... 4 1.1 Functional Description .............................................................. 4 1.2 LED Description......................................................................... 5 1.3 Block Diagram ........................................................................... 6 1.3.1 Block description ....................................................................................... 6 1.4 Features .................................................................................... 7 1.5 Performance Figures ................................................................. 7 1.6 Ordering Information ................................................................ 7 2 Installation .................................................................... 8 2.1 Hardware Installation ............................................................... 8 2.1.1 Mounting .................................................................................................. 8 2.1.2 Wiring ...................................................................................................... 8 2.2 Device Driver Installation ......................................................... 9 2.2.1 Microsoft Windows ..................................................................................... 9 2.2.2 Mac OS X, Linux, Windows CE ....................................................................11 2.3 Firmware Update .................................................................... 11 3 Connections ................................................................. 12 3.1 External Connectors ................................................................ 12 3.1.1 USB ........................................................................................................12 3.1.2 CANbus ...................................................................................................12 4 Application Programming Interfaces ............................ 13 4.1 ASCII commands .................................................................... 13 4.1.1 Set CAN Channel Timing simple (S) .........................................................14 4.1.2 Set CAN Channel Timing advanced (s)......................................................14 4.1.3 Set Acceptance Mask (m) ..........................................................................15 4.1.4 Set Acceptance Filter (M) ..........................................................................16 4.1.5 Enable Time Stamp (Z) .............................................................................16 4.1.6 Open CAN Channel (O)..............................................................................17 4.1.7 Open CAN Channel for Listen Only (L) .........................................................17 4.1.8 Close CAN Channel (C) ..............................................................................18 4.1.9 Echo / Synchronize (E) ..............................................................................19 4.1.10 Transmit Standard CAN Frame 11-bit ID (t) ..............................................19 Copyright Connective Peripherals Pte Ltd 2