USBC-FS-RS232-0V-1800-WE Datasheet Document Reference No.: CP 000064 Version 1.2 Issue Date: 06-11-2020 Connective Peripherals Pte Ltd 178 Paya Lebar Road, 07-03 Singapore 409030 Tel.: +65 67430980 Fax: +65 68416071 E-Mail (Support): support connectiveperipherals.com Web: www.connectiveperipherals.com/products Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Connective Peripherals Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Connective Peripherals Pte Ltd, 178 Paya Lebar Road, 07-03 Singapore 409030. Registered Number: 201617872E Copyright Connective Peripherals Pte Ltd USBC-FS-RS232-0V-1800-WE Datasheet Version 1.2 Document Reference No.: CP 000064 Clearance No.: CP 055 1 Introduction The USBC-FS-RS232-0V-1800-WE is a USB Type C to RS232 levels serial UART converter cable incorporating FTDIs FT230XQ USB to serial UART interface IC device which handles all the USB signalling and protocols. The cable provides a fast, simple way to connect devices with a RS232 level serial UART interface to USB Type C. The USBC-FS-RS232-0V-1800-WE contains a small internal electronic circuit board, utilising the FT230X, which is encapsulated into the USB Type C connector end of the cable. Refer to DS FT230X for details. The integrated electronics also include the RS232 level shifter. The other end of the cable is bare, tinned wire ended connections by default, but can be customised using different connectors to support various applications. The cable is FCC, CE, and RoHS compliant. The USB Type C side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 1 Mbaud. Each cable supports the FTDIChip-ID, with a unique USB serial number programmed into the FT230X. This feature can be used to create a security or password protected file transfer access using the cable (requires D2XX drivers). Further information and examples on this feature are available at FTDIChip-ID Projects. The USBC-FS-RS232-0V-1800-WE requires USB drivers, available free from