Product Brief
Publication Number 17-3730-01
Nano WiReach MAX-SMT
Station or Access Point - Switchable
Miniature embedded secure
802.11b/g/n WiFi SMT module
General Description:
Typical applications:
Nano WiReach MAX-SMT is a secure
embedded Wireless LAN module that easily Adding WiFi to serial embedded devices
connects embedded devices to 802.11b/g/n Replacing LAN cable using WiFi (bridge)
Wireless LAN, 10/100BaseT wired LAN and WiFi/LAN/Cellular Router
cellular WAN. It includes the iChip CO2144 Adding SSL security to M2M solutions
IP Communication Controller chip and
Marvell 88W8787 WiFi chipset. It is packaged
Nano WiReach MAX-SMT supports several
in a 37x20mm RoHS-compliant ultra-slim low
operation modes:
profile 44-pin SMT module form factor with an
LAN to WiFi Bridge - allowing transparent
on-board or external antenna.
bridging of LAN over WiFi, using direct RMII
connection to existing MAC hardware or
Embedded Device
direct PHY-to-PHY connection.
Microcontroller
PHY-to-PHY
Microcontroller
Ethernet
WiReach
Serial
MAX-SMT
Ethernet Ethernet
USB EMAC
WiReach SMT
PHY PHY
SPI
802.11b/g/n
Microcontroller
MAC-to-MAC
RMII
EMAC WiReach SMT
Nano WiReach MAX-SMT makes adding
TM
SerialNet Serial to WiFi Bridge - allowing
Internet connectivity to embedded devices a
transparent bridging of Serial over WiFi,
breeze. It does not require any kind of WiFi
using a 3Mbps fast UART. This is a true
driver development on the host CPU, and its
plug-and-play mode that eliminates any
multiple interfaces (UART, SPI, RMII and
changes to the host application.
USB 1.1) minimize the need to redesign the
PPP modem emulation allowing existing
host device hardware.
(e.g. modem) designs currently using PPP
to connect transparently over WiFi
Connect Ones high-level AT+i API
Embedded Access Point WiFi access
eliminates the need to add WiFi, LAN or
point. Includes a DHCP server, NAT and
cellular drivers, security and networking
port forwarding.
protocols or communication tasks to the host
Embedded Router Providing routing
application.
facilities between a wired LAN subnet a
WiFi subnet and a cellular WAN connection.
Nano WiReach MAX-SMT supports the
Includes a DHCP server, NAT and port
SSL3/TLS1 protocol for secure sockets,
forwarding.
HTTPS and FTPS, WEP, WPA/WPA2 (PSK
Full Internet Controller mode allowing
and Enterprise) WiFi encryption.
simple MCU to use the Nano WiReach
MAX-SMTs rich protocol and application
Nano WiReach MAX-SMT firmware and
capabilities to perform complex Internet
configuration parameters are stored in on-
operations such as E-mail, FTP, SSL,
board flash memory. The module is power-
embedded web server and others. It also
efficient: the core operates at 1.2V, while I/Os
acts as a firewall, providing a security gap
operate at 3.3V. Power Save mode further
between the application and the network.
reduces power consumption.
Connect One Ltd.
20 Atir Yeda Street
Kfar Saba 44643, Israel
Phone: +972-9-766-0456
Fax: +972-9-766-0461
Email: sales@connectone.com
Product Brief
Publication Number 17-3730-01
Flow Control: Hardware (-RTS,
The II-EVB-365N evaluation board provides an -CTS) and software flow control.
easy environment for evaluating the Nano
Internet Protocols:
WiReach MAX-SMT.
ARP, ICMP, IP, UDP, TCP, DHCP,
Hardware Description:
DNS, NTP, SMTP, POP3, MIME,
Size: 37.0 x 20.0 x 2.5 mm HTTP, FTP and TELNET
Core CPU: 32-bit RISC ARM7TDMI,
Security protocols: SSL3/TLS1,
low-leakage, 0.13 micron, at 48MHz
HTTPS, FTPS, RSA, AES-128/256,
Operating Voltage: +3.3V+/-10% 3DES, RC-4, SHA-1, MD-5, WEP,
WPA/WPA2 (PSK and Enterprise)
Operating Humidity: 90% maximum
(non-condensing) Protocols accelerated in hardware:
Operating Temperature Range: AES, 3DES and SHA
Industrial Commercial
Application Program Interface:
-30c to +85c -20c to +70c
AT+i protocol for Internet Controller mode
-22F to 185F -4F to 158F
SerialNET mode for transparent serial
Power Consumption:
data-to-Internet bridging
Transmit 170mA@11Mbps,
LAN-WiFi transparent bridging
280mA@54Mbps,
PPP operation mode for Modem-WiFi
275mA@72Mbps (typical)
conversion
Receive 190mA (typical)
LANWiFi; WiFiCellular; LANCellular
Power Save mode 7mA
Routing
Optional: On-Board Antenna
Optional: U.FL RF Connector
Warranty:
Connection: 44 SMT pads
One year
Host Interface: Serial, SPI, USB Device
Certifications: (Pending Approvals)
A/D Input
Radio & EMC:
Cellular Modem Interface: USB Host
- USA
10/100 BaseT LAN Interface: RMII
o FCC Modular Approval
(w/ext. PHY)
o CFR Title 47 FCC Part 15, Subpart B and C
RoHS-compliant; lead-free
- Canada
Wireless Specifications:
o Industry Canada Module Approval
Standards supported:
o Industry Canada ICES-003, RSS-Gen, RSS-210
IEEE 802.11b/g/n
- EU
Frequency: Europe 2.412-2.472GHz
o EN 300 328 (R&TTE Directive 1999/5/EC)
USA 2.412-2.462GHz
o EN 301 489 (EMC Directive 2004/108/EC)
Japan 2.4122.484GHz
Safety:
Channels: Europe 13 channels
o UL 60950
USA 11 channels
o CAN/CSA-C22.2 No. 60950
Japan 14 channels
o EN 60950, Low Voltage Directive (2006/95/EC)
Performance Specifications:
Host Data Rates:
o UART: Up to 3Mbps
o SPI: Up to 12Mbps
o USB 1.1: Up to 6Mbps
Serial Data Format (AT+i mode):
Asynchronous character; binary; 8
data bits; no parity; 1 stop bit
Installation Requirements:
Serial Data Format (SerialNET mode):
The Nano WiReach MAX-SMT must be
Asynchronous character; binary; 7 or 8
installed within a full-enclosure device that
data bits; odd, even, or no parity; 1
is safety certified.
stop bit
Connect One Ltd.
20 Atir Yeda Street
Kfar Saba 44643, Israel
Phone: +972-9-766-0456
Fax: +972-9-766-0461
Email: sales@connectone.com