DOC102F-040.0M Connor-Winfield

** Available at Digi-Key www.digikey.com Surface Mount Oven Stabilized Oscillator DOC Series OCXO / VCOCXO Description: Features: Connor-Winfields high stability DOC series are 2111 Comprehensive Drive OCXO - Fixed Frequency exceptionally precise frequency 2111 Comprehensive Drive Aurora, Illinois 60505 VCOCXO- Voltage Controlled Option standards, excellent for use Aurora, Illinois 60505 3.3 Vdc Operation Phone: 630-851-4722 in cellular base stations, test Phone: 630-851-4722 SMT Package equipment, Synchronous Fax: 630- 851- 5040 Frequency Stabilities Available: Fax: 630- 851- 5040 Ethernet and VSAT applications. www.conwin.com 20ppb , 50ppb, 100ppb, 140ppb, 250ppb These true surface mount www.conwin.com Temperature Ranges Available: OCXO / VCOCXO oscillators 0to 70C, -20 to 75, -40 to 85C provide frequency stabilities in the range of 20 or-40 to 70C ppb to 250ppb, over the commercial, extended Low Phase Noise commercial or the industrial temperature range. LVCMOS Output The DOC series is available with a CMOS Optional Electronic Frequency Tuning output and a Voltage Controlled Option. These RoHS Compliant / Lead Free oscillators provide outstanding phase noise characteristics that will meet the most stringent requirements. Suggested Pad Layout Package Outline 0.358 0.060 0.375 0.307 (9.1mm) (1.52mm) (9.52mm) (7.80mm) 0.085 0.085 (2.16mm) (2.16mm) 0.060 DNC (1.52mm) 0.275 (6.99mm) 4 3 0.100 0.555 (2.54mm) 0.260 Top 2 5 (14.1mm) View (6.60mm) 0.100 0.040 (2.54mm) 6 (1.02mm) 1 0.040 Keep (1.02mm) Out DNC = Do Not Connect DNC Area 0.025 (0.64mm) Bottom Top Side DimensionalTolerance: +/-0.005 (0.127mm) View View View Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. www.conwin.com/support.html Pad Connections 1: N/C or Voltage Control (Vc) 2: Do Not Connect* 3 Gr ound: 4: Output 5: Do Not Connect* 6: Supply Voltage (Vcc) *DO NOT connectDN pads to ground or supply rails. Ordering Information DOC 05 0 F -010.0M Oscillator Frequency Output ** Not all Temperature Voltage Control Type Stability Frequency Range Option options 02 = 20 ppb 3.3 Vdc Frequency available at 0 = 0 to 70C F = OCXO 05 = 50 ppb LVCMOS Output Format *Amount of 1 = -20 to 75C (Fixed Freq.) 10 = 100 ppb numbers after the Digi-Key Surface Mount -xxx.xM Min.* 2 = -40 to 85C V = VCOCXO 14 = 140 ppb decimal point. OCXO -xxx.xxxxxxM Max* (Voltage Controlled) Bulletin 3 = -40 to 70C M = MHz 25 = 250 ppb Cx207 Page 1 of 4 Example Part Numbers: Revision 23 DOC050F-010.0M = 9x14mm package, 50 ppb, 0 to 70C, 3.3 Vdc, CMOS Output, OCXO, Output Frequency 10.0 MHz Date 05 Nov 2019 DOC022V-020.0M = 9x14mm package, 20 ppb, -40 to 85C, 3.3 Vdc, CMOS Output, VCOCXO, 20.0 MHz 1028 DOC050F 10.0MHz 1945 DOC050F 10.0 MHz 12111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 C Supply Voltage - 3.3 Vdc (Vcc) -0.5 - 4.5 Vdc Control Voltage (Vc) -0.5 - Vcc+0.5 Vdc Operating Specifications Parameter Minimum Nominal Maximum Units Notes Center Frequency: (Fo) 10, 12.8, 19.44, 20, 25, 38.88, 40, or 49.152 MHz Frequency Stability vs. Change in Temperature: (See Ordering Information) Stability Code 02 -20 - 20 ppb 1 Stability Code 05 -50 - 50 ppb 1 Stability Code 10 -100 - 100 ppb 1 Stability Code 14 -140 - 140 ppb 1 Stability Code 25 -250 - 250 ppb 1 Operating Temperature Range: (See Ordering Information) Temperature Code 0 0 - 70 C Temperature Code 1 -20 - 75 C Temperature Code 2 -40 - 85 C Temperature Code 3 -40 - 70 C Frequency Calibration: -1.0 - 1.0 ppm 2 Frequency Stability vs Load -20 - 20 ppb 5% Frequency Stability vs Voltage -20 - 20 ppb 5% Aging: Daily: -10 - 10 ppb/day 3 Aging: First Year: -300 - 300 ppb 3 Total Frequency Tolerance (20 Years) -4.60 - 4.60 ppm 4 Supply Voltage: (Vcc) 3.13 3.30 3.47 Vdc 5 Power Consumption: Vcc = Nominal Voltage Commercial Temperature Range, 0 to 70 C Turn On - - 2.5 W Steady State 25C - - 1.1 W Industrial Temperature Range, -40 to 85 C Turn On - - 3.0 W Steady State 25C - - 1.3 W Phase Jitter: (BW: 12 KHz to 5MHz Fo=49.152MHz) - 0.3 0.35 ps RMS Short Term Stability - - 1.0E-9/s Start-Up Time (when Vcc ramp is <= 500us) - - 10 ms 6 Warm Up Time (Within Specification 25C) - - 60 s Warm Up Time (Within Specification -40C) - - 90 s CMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load - 15 - pF 7 Output Voltage: Output Voltage: High (Voh) 2.7 - - V Low (Vol) - - 0.3 V Output Current: High (Ioh) - - -4 mA Low (Iol) 4 - - mA Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time: 10% to 90% - - 6.5 ns Input Characteristics - Voltage Controlled Option Parameter Minimum Nominal Maximum Units Notes Control Voltage Range: 0.30 1.65 3.00 V 8 Frequency Pullability: 10.0 - - ppm 9 Input Impedance 100K - - Ohms Linearity 5 - - % Bulletin Cx207 Page Attention: System Designers please review Application Note AN2093: 2 of 4 System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. Revision 23 www.conwin.com/support.html Date 05 Nov 2019 Specifications subject to change without notification. See Connor-Winfield s website for latest revision. Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.