OH4610LF-040.0M Connor-Winfield

Precision OCXO OH4 Series Preliminary 2111 Comprehensive Drive Description: Features: Aurora, Illinois 60505 The Connor-Winfield OH4 OCXO - Fixed Frequency Phone: 630-851-4722 OCVCXO - Voltage Controlled Series, 14 Pin DIP Oven Fax: 630- 851- 5040 Frequencies Range: 6.4 MHz to 40 MHz Stabilized Crystal Controlled Hig Fhererquencies available upon request www.conwin.com Oscillators (OCXO) series, 3.3V or 5.0V Operation and Oven Stabilized Crystal LVCMOS, HCMOS or Sinewave Output Controlled Voltage Controlled Oscillators Frequency Stabilities Available: 5ppb 10ppb 20ppb 25ppb (OCVCXO) series, are designed for use in 50ppb, or 100ppb applications requiring stabilities of 5ppb to Temperature Ranges Available: 100ppb. The OH4 series is also designed for 0 to 70C, -20 to 70C, -20 to 75C, -40 to 70C, or -40 to 85C compliance to ITU-T G.8262 Options 1 and 2, Low Phase Noise and ITU-T G.8263. 14 Pin DIP Package RoHS Compliant / Lead Free Pin Connections 14 Pin DIP Package .800 .500 Pin Function (20.32mm) (12.7mm) 1: OCXO - N/C .400MAX (10.16mm) OCVCXO - Voltage Control 7 Ground (Case) .018Dia25 (.46mm Dia.) 8: Output (6.35mm) .025 (.64mm) 14: Vcc Glass Standoff .600 (15.24mm) (4 Places) .150 1740 (3.81mm) CW 14 .300 OH4520LF (7.62mm) 10.0 MHZ DimensionalTolerance: .400 .005 (.127mm) (10.16mm) .02 (.508mm) Ordering Information L -010.0M OH4 5 10 F Oscillator Frequency Package Output Temperature Output Supply Voltage / Output Type Stability Type Frequency Range *05 = 5 ppb 5 = 0 to 70C F = OCXO L = 3.3Vdc / LVCMOS Precision OH4 = 14 Pin DIP M = MHz 10 = 10 ppb 6 = -40 to 85C (Fixed Freq.) H = 5.0Vdc / HCMOS Frequency Std xxx.xxM 20 = 20 ppb 7 = -20 to 70C V = OCVCXO S = 5.0Vdc / Sinewave OCXO or 25 = 25 ppb (Voltage Controlled) 8 = -40 to 70C R = 3.3Vdc / Sinewave OCVCXO 50 = 50 ppb 9 = -20 to 75C 100 = 100ppb Bulletin Bulletin * 5ppb stability Cx225 Cx259 only available Page Page 1 of 4 for 0 - 70C or 1 of 4 -20 to 70C Revision Revision P04 07 Date Date 07 Sep 2011 15 Oct 20192111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 C Supply Voltage (Vcc) 3.3V LVCMOS -0.5 - 4.5 Vdc 5.0V HCMOS / Sinewave -0.5 - 7.0 Vdc Control Voltage (Vc) 3.3V LVCMOS -0.5 - 4.5 Vdc 5.0V HCMOS / Sinewave -0.5 - 7.0 Vdc Operating Specifications Parameter Minimum Nominal Maximum Units Notes Frequency Calibration -0.3 - 0.3 ppm 1, 4, 9, Frequency Stability *05: 5 10: 10 20: 20 50: 50 100: 100 ppb 2 Frequency vs Change in Supply Voltage -10 - 10 ppb 3 Aging Daily -5 - 5 ppb 4 Aging 1st Year -0.3 - 0.3 ppm Total Frequency Tolerance (20 years) -1.5 - 1.5 ppm 5, 10 Supply Voltage (Vcc) 3.3V LVCMOS 3.13 3.3 3.47 Vdc 5.0V HCMOS / Sinewave 4.75 5.0 5.25 Vdc Supply Power (0 to 70C) - - 1.4 Watts Supply Power (-40 to 85C) - - 2.2 Watts Phase Jitter (BW = 10KHz to Fo/2) - - 1 ps RMS Period Jitter - - 5 ps RMS Allan Variance (1 second) - 5.0E-11 - SSB Phase Noise at 10Hz offset - -100 - dbc/Hz 6 SSB Phase Noise at 100Hz offset - -120 - dbc/Hz 6 SSB Phase Noise at 1kHz offset - -140 - dbc/Hz 6 SSB Phase Noise at 10kHz offset - -150 - dbc/Hz 6 Start-Up Time Oscillator - - 35 ms Warm-Up Time - - 3 Minutes 7 OCVCXO Characteristics Parameter Minimum Nominal Maximum Units Notes Control Voltage Range:(Vc) 3.3V LVCMOS 0.30 1.65 3.0 Vdc 5.0V HCMOS / Sinewave 0.50 2.50 4.50 Vdc Frequency 3.3V LVCMOS at Vc=0.3 Vdc - -7 -5 ppm 8 3.3V LVCMOS at Vc=3.0 Vdc 5 7 - ppm 8 5.0V HCMOS /Sinewave at Vc=0.5Vdc - -7 -5 ppm 8 5.0V HCMOS /Sinewave at Vc=4.5Vdc 5 7 - ppm 8 Slope of Frequency Adjust 3.3V LVCMOS 3.7 - - ppm/V 5.0V HCMOS /Sinewave 2.5 - - ppm/V Imput Impedance 100K - - Ohms 1. Initial calibration 25C. OCVCXO modelVc = Nominal. 2. Frequency stability vs. Change in temperature, referenced to 25C. 3. Frequency stability per 5% change in supply voltage. 4. At the time of shipment after 48 hours of operation. 5. Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, OCVCXO models Vc = Nominal. 6. Typical phase noise, results will vary depending on center frequency The. phase noise shown are typical for 20 MHz. 7. Measured 25C, within 3 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous Bulletin Cx259 operation at a stable 25C. Page 2 of 4 8. OCVCXO models pullability referenced to Fo 25C, Positive Transfer Characteristics Revision 9. Initial calibration 25C. OCVCXO modelVc = Nominal. 07 Date 10. Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration 20 years aging, OCVCXO models Vc = Nominal. 15 Oct 2019 Specifications subject to change without notification. See Connor-Winfield s website for latest revision. Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.