Ref.ID 2301, Rev.C TM CorDEX CONNECT Software Enhanced Reporting UT5000 Realtime Tracking Maintenance Scheduling INTRINSICALLY SAFE THICKNESS GAUGE ATEX and IECEx Certified for Zone CorDEX Instruments UT5000 Intrinsically Safe thickness gauge with CorDEX CONNECT measures metal thickness for Non-Destructive Testing (NDT) and Predictive 1 IIC T4 hazardous Maintenance (Pdm) on pipelines and fixed equipment within hazardous locations. vapour areas UT5000 is a next generation thickness gauge packed with proven technologies: CorDEX ATEX and IECEx CONNECT uses RFID + Software to tag measurements with their location then organises the data, giving the engineer a view of the pipeline at any specific location Certified for ibD IIIB the unique corrosion mode feature helps identify spots of thinning whilst MultiECHO T200C Db hazardous technology helps to improve accuracy on uneven surfaces. Also incorporating Echo- Echo functionality, the UT5000 is able to take thickness readings through protective dust areas paints without having to remove the coating. Features CorDEX Designed for rugged environments, the shock resistant skin protects a 3.1 inch (8cm) CONNECT colour screen and has easy-to-feel raised buttons. The intrinsically safe dual-element, 4MHz transducer is adjustable up to 8Hz with accuracy of +/- 0.05mm (0.01inch). Full Colour, Backlit Screen Ref.ID 2301, Rev.C EchoEcho Technology Specifications ATEX Certificate No: Baseefa11ATEX0114 Measure thicknesses through IECEx Certificate No: IECEx BAS 11.0094 painted surfaces. ATEX/IECEx Certificate Type: Ex ib IIC T4 Gb / Ex ibD IIIB T200C Db Memory Stores up to 1000 measurements* Screen 8cm (3.1inch) RGB TFT colour screen with backlight Right/left handed set up Transducer Dual Element Measurements MulEti CHO Echo-Echo Corrosion Mode Pulse Rate Standard transmit pulse rate of 4Hz Adjustable from single shot up to 8Hz Receiver Bandwidth 1MHz to 15MHz (-3dB points) Frequency 4MHz, 3mm up to 100mm (0.02in to 3.9in) Corrosion Mode Accuracy +/- 0.05mm (0.002in) Continuous, real time measurements RFID Tag Reader Operates with 13.54MHz passive tags Detection range up to 5cm (1.9in) are logged with Min-Max- Average SupportsISO/IEC15693-2,ISO/IEC18000-3 tag formats thickness readings Baertt y Details Lithium thionyl chloride primary 3.6V cell 100 hours continuous operation with back light restrictions low baertt y warning Operating Temperature -10 to +50C (14 F to 122 F) Weight 1Kg (2.2lb) CorDEX CONNECT System Requirements Windows Version Minimum Recommended XP 512MB RAM 1024MB RAM TM Vista, 7 1024MB RAM 2048MB RAM MultiECHO Technology Requires Adobe Reader to view the reports created Brackets four echoes before providing a reading, reducing intermittent UT5000 is supplied complete as standard with: readings caused by irregular echoes UT5000 Baertt y Pack Material Velocity Tables Hard carry case 2 x Wrist strap 1 x Probe 5 x ATEX RFID tags Drop-down menus to select the USB communication cable 1 x Calibration Block correct material velocity Couplant gel Authorised distributor Why not visit CorDEX Instruments website for the latest news and downloads, or even come and join our CorDEX Instruments Community and learn more about the technology CorDEX Instruments provide. CorDEX Instruments reserve the right to make changes to the instrument at anytime and without notice. *Check operations maintenance manual for compatibility. *This number may decrease with the number of saved multi-point readings. For more information and customer testimonials, contact... CorDEX Instruments Ltd Unit 1, Owens Road, Tel: +44 (0) 1642 454373 Skippers Lane Industrial Estate, Tel USA: 1 877 836 0764 Middlesbrough, Email: sales cord-ex.com Cleveland TS6 6HE Web: www.cordexinstruments.com